I-Tech I-TECH LA8000, User Manual

Page: 31 / 44

IACER Srl 27 MNPG179
machines and, in any case, the machines should be opened only by
authorized, specially trained technical staff from IACER Srl.
HANDEL CLEANING
The optical fiber laser handpiece is a delicate component which requires
suitable daily maintenance.
The following recommendations should be observed to protect the fiber and
lens from damage.
IACER's recommendations:
1. use a soft cloth to remove traces of dust;
2. clean the external parts with neutral, non-abrasive products;
3. use a cloth to dry the external parts with care.
REPLACEING THE FUSES
In order to replace correctly the fuses on the back of the device, follow the
instructions below:
-
turn off the equipment;
-
unplug the equipment;
-
use a screwdriver to open the fuse-holder tray, making sure to insert
the screwdriver in the slot of the fuse-holder tray and lever it
outwards;
-
remove the fuse-holder structure, sliding it along the guide;
-
remove the fuses and replace them with the same number of new
ones;
-
insert the fuse-holder structure back in the tray, sliding it along the
guide;
-
close the plastic cover of the fuse-holder tray and use the tool to
fasten the fuse-holder caps.
It is advisable to have the fuses replaced by staff who have received suitable
technical training, in the interest of safety.
Power supply
230Vac 50Hz
Fuses
LA8000/LA10000
View of the back