I-Tech I-TECH LA8000, User Manual

Page: 20 / 44

IACER Srl 16 MNPG179
-
Insert the INTERLOCK key in order to run the machine.
-
Do not use accessories other than the original ones provided: non-
original ones can damage the machine and render the warranty null and
void. If any problems or difficulties arise during installation, please
contact the technical assistance service at IACER srl.
-
Suggestions concerning therapy are saved on the hard drive of the
machine. These cannot be deleted or modified, but the parameters can
be customized in the programs available in the "Libero" (Free) section.
Patient preparation
The skin of the patient must first be prepared for laser therapy. This is to
ensure that the laser reaches the affected areas in the best possible manner,
while also reducing the risk of skin irritation.
Prepare the patient's skin for therapy as follows:
1. clean the skin with care where the head of the laser is to be
positioned, using either water and soap or alcohol.
2. dry the skin thoroughly.
Cleaning and disinfection must be carried out systematically before treating
the patient.
Instructions for use
!Warning!
PRELIMINARY NOTES
-
Utilizzare un nome diverso per ogni protocollo
personalizzato, utilizzando lo stesso nome per due
protocolli personalizzati diversi verranno salvati i due
trattamenti differenti con lo stesso nome.
-
Before connecting the cable to the mains plug, check that
the equipment isn’t damaged during transport. Ensure that the power
supply specifications on the main socket correspond with the
information on the label attached to the back of the unit.
-
Prima di iniziare qualsiasi trattamento è molto importante collegare il
MANIPOLO che si desidera utilizzare nell’apposito connettore del
pannello frontale.
USE
-
DURING TREATMENT IN CONTINUOUS MODE, IT IS FORBIDDEN TO
HOLD THE HANDPIECE STILL IN ONE POSITION. IT IS ESSENTIAL TO