I-Tech I-TECH LA8000, User Manual

Page: 34 / 44

IACER Srl 30 MNPG179
PROBLEM POSSIBLE CAUSE SOLUTION
Some components on the
electronic control circuit
are defective.
Contact the
manufacturer The power supply
sections of the laser
sources are defective.
The equipment
works properly
but there is an
evident decrease
in the efficiency of
treatment.
The laser sources are
worn out or defective.
Contact the
manufacturer
The current generating
circuit in the equipment
may be defective.
The equipment
does not turn on
or appears to
work properly but
there
is no
emission.
Loss of pressure in the
actuator.
Check air-tightness.
When any of the following conditions occur, unplug the equipment and
contact the IACER Srl technical assistance service:
•
the cable or rear integrated power supply module are worn or
damaged;
•
liquid has entered the equipment;
•
the equipment has been exposed to rain.
-
Only authorized technical staff from the manufacturer may access the
internal parts of the equipment.
-
Please contact IACER Srl or its authorized service centers for repairs
and further information.
!CAUTION!
-
DO NOT open the device: the HIGH VOLTAGE inside can be
DANGEROUS.
Disposal
The therapeutic laser devices I-TECH LA8000/LA10000 were designed and
engineered to have minimal negative environmental impact, in