I Luv Coffee Life, User Manual

Page: 12 / 32

The cycle can be interrupted at any time by pressing the selected button.
It is advisable to leave the filter holder connected to the brewhead (after emptying it) until the next
preparation, in order to retain the heat.
Remark : In the morning, or after a period of prolonged disuse, switch on the heating and hot water taps then
perform a cycle while empty on each brewhead in order to stabilize the temperatures and purge the machine.
3. Hot water preparation
Put the cup or the pot under the hot water
outlet. Press the button hot water to start
the cycle.
It stops automatically.
The hot water button is now placed above the hot water nozzle.
Specific button with 2 programmable volumes :
- short press (<1sec)

First
dose - long press (>1sec)

Second dose
4. How to use the steam arm
Manipulation


Press the key slightly to allow the condensation to escape.


Plunge the steam tube into the contents and press on the key machine.
After each use, clean the spout by rubbing a wet cloth over it. The nozzle is purged automatically (after 30
seconds).
5. How to use the Barista Steam (emulsion/heating milk)
For an optimal system Barista Steam use, it is advisable to use fresh milk at the ideal
temperature of 5 ° C. How to adjust the density of the foam
It is possible to adjust the density of the foam by acting on the adjusting
screw (see photo). If you turn the adjustment screw clockwise : finer
foam.
If you turn the adjustment screw counterclockwise : thicker foam.
Remark : Barista Steam nozzle is purged automatically after each use (after 30 seconds).
9