background image

I Luv Coffee 1 Year Limited Warranty 

WARRANTY PERIOD 

This  is  a  genuine  I  Luv  Coffee

 

Warranty.  If  you  have  purchased  a  separate  warranty  from  a  third  party,  please  refer  to  that 

particular warranty for terms and conditions, as these warranties are sold independently from I Luv Coffee. 

This warranty is for a period of 1 year from the date of installation on all original parts and limited to 90 days for labour costs. 

WARRANTY CONDITIONS FOR I LUV COFFEE EQUIPMENT 

1.

I  Luv  Coffee  warrants  that  the  product  you  have  purchased  is  free  from  manufacturing  defects  in  materials  and 
workmanship when dispatched from our warehouse. The attached Warranty Registration is to be completed noting 
all requirements and forwarded to: Customers Service, I Luv Coffee, PO Box 2661, Burleigh BC, QLD, 4220, this will 
be registered as your proof of installation.  This warranty extends only to you, the original purchaser, and is non-
transferable. 

2.

During  the  Warranty  period  as  indicated  above,  I  Luv  Coffee

 

will,  at  no  additional  charge,  replace  defective  parts 

with  new  parts  or  serviceable  parts  that  are  equivalent  to  new  parts  in  performance.    All  replaced  or  exchanged 
parts which are taken out under this warranty become the property of I Luv Coffee. 

3.

This  warranty  does  not  extend  to  any  product  purchased  from  other  than  an  I  Luv  Coffee

 

dealer  or  agent.    This 

warranty automatically comes void if the product has been physically damaged or rendered defective: (a) as a result 
of  an  accident,  misuse,  abuse,  non  compliance  of  cleaning  maintenance  or  other  circumstances  beyond  I  Luv 
Coffee’s

 

control; (b) by the use of parts or product not manufactured or supplied by I Luv Coffee; (c) as a result of 

normal wear and tear; (d) by use within an improper operating environment; (e) by modification of the product; (f) 
the  serial  numbers  have  been  removed  or  defaced;  (g)  as  a  result  of  service  rendered  by  anyone  other  than  an 
Authorised Service Provider; (h) as a result of the product being operated otherwise than in accordance with  I Luv 
Coffee’s instructions or; (i) non replacement of required water filters (recommended every 5000 cups).  

This warranty does not cover equipment if– 

(a)

the Equipment has been altered, modified or otherwise interfered with; 

(b)

the failure is due to normal wear and tear; 

(c)

the Equipment has been negligently used, abused, misused or neglected; 

(d)

the  Equipment  has  been  subjected  to  unusual  physical,  environment,  plumbing  or  electrical  stress  where 
specifications are not adhered to; 

(e)

the Equipment is installed or operated otherwise than in accordance with any instructions specified by I Luv Coffee; 

(f)

any serial numbers have been removed or defaced; 

(g)

the Equipment has been serviced by anyone other than an I Luv Coffee

 

Authorised Service Agent; 

(h)

any I Luv Coffee product purchased from any unauthorised reseller or sourced through any unauthorised channel; 

(i)

the defect or failure is due to parts or products other than those manufactured or supplied by I Luv Coffee; 

(j)

the defect or failure is due to any act, default or omission by any person other than I Luv Coffee, its employees or 
agents  or  to  events  outside  the  control  of  I  Luv  Coffee

 

including  vermin  infestation,  faulty/fluctuation  in  mains 

power or water supply, fire, flood, accident, terrorist attack or any other act of God; 

(k)

the Equipment water filters are not replaced when recommended; 

(l)

the Equipment is not serviced as recommended; 

(m)

the failure is due to operator error; 

(n)

the failure is due to cleaning procedures not being completed as recommended or; 

(o)

user adjustments are made. 

(p)

Any damage relating to water quality. 

LIMITATION OF LIABILITY (AUSTRALIA) 

Provisions of the Trade Practices Act 1974 (Commonwealth) as amended and other State legislation may imply warranties or 
conditions or imposed obligations under I Luv Coffee which cannot, in whole or in part, be excluded, restricted or modified.  To 
the extent permitted by law, I Luv Coffee’s liability (if any) arising out of or in relation to the products or services supplied by I 
Luv Coffee shall be limited, as its option, to: 

(a)

 

in case of products, the replacement or repair of the products or the supply of equivalent products, or the payment of the 
cost of replacing the products or having the products repaired or of acquiring equivalent products; and 

(b)

 

in the case of services, the supply of the services again or the payment of the cost of having the services supplied again. 

(1) 

Summary of Contents for Life

































Reviews: