I Luv Coffee Life, User Manual

Page: 15 / 32

2. Procedure for hot water (H. W.) : 2 programmable doses
T5
H.W


Place a cup under the hot water exit. Press the button T5 (about 5
seconds) until the LED T5 flashes.


Press on the « Hot water » ( H. W. ) button corresponding to the requested dose.


Once the requested dose is reached, press the selected button again to stop the cycle and
memorize the dose. Caution, the 2 hot water doses have to be programmed separately.
3. Programming of temperature of Barista Steam (B. S.) (emulsion/heating milk)
Emulsion mode
T5
B.S


Place a container with fresh milk (or water) under
the Barista Steam nozzle.


Press the button T5 (about 5 seconds) until the LED T5 flashes.

 Press the B. S. button to start the programming.


When the liquid reaches the desired temperature (maxi. 65°C), press again the Barista
Steam to stop the cycle and memorize the scheduled temperature.
Heating mode
Repeat the previous operations (emulsion mode) by pressing the B. S. button (long press) in order to
switch to the heating mode and start up the cycle.
When you use heating milk mode, the desired temperature can be higher than 65°C.
12