I Luv Coffee Life, User Manual

Page: 14 / 32

PROGRAMMING THE DOSES
T1 = 1 short coffee button
T2 = 2 short coffees button
T3 = 1 long coffee button
T4 = 2 long coffees button
T5 = ‘Continuous’ button
If you exceed 30 seconds (in programming mode) before starting a dosing
cycle, you leave the programming mode. Then repeat all the operations.
You can also leave the programming mode by pressing again button T5.
1. Procedure for coffee
Principle
The left-hand brewhead is the master brewhead. In other words, every coffee dose programmed on the
left-hand keyboard will automatically be programmed on the right one. After that, it is always possible
to re-programme- and alter the doses on the right-hand brewhead(s) by repeating the procedure
described below in this respect.
The programming operation requires the use of coffee to be precise
.
T1 T5


Prepare the suitable coffee dose and connect the filter holder to the left-hand brewhead.
Put the cup(s) under the spout of the filter holder.


Press the continuous button T5 (about 5 sec).


Press the button corresponding to the dose you want to programme (for example dose of a little cup T1 ). As
soon as the desired dose is complete, press the selected button to stop the coffee cycle and memorise the dose.
Repeat operations 1. to 3. to memorise the other coffee doses.
11