1- 20
FEATURES OF YOUR HYUNDAI
You can adjust the height of the shoul-
der belt anchor to one of the 4 positions
for maximum comfort and safety.
If the height of the adjusting seat belt is
too near your neck, you will not be
getting the most effective protection.
The shoulder portion should be ad-
justed so that it lies across your chest
and midway over your shoulder near-
est the door and not your neck.
To adjust the height of the seat belt
anchor, lower or raise the height ad-
juster into an appropriate position. To
raise the height adjuster, pull it up. To
lower it, push it down while pressing
the height adjuster button.
B170A01L
B170A01L-GAT
HEIGHT ADJUSTABLE FRONT
SEAT SHOULDER BELT
B160C01A-AAT
Keep Belts Clean and Dry
Seat belts should be kept clean and
dry. If belts become dirty, they can be
cleaned by using a mild soap solution
and warm water. Bleach, dye, strong
detergents or abrasives should not be
used because they may damage and
weaken the fabric.
B160D01A-AAT
When to Replace Seat Belts
Entire in-use seat belt assembly or
assemblies should be replaced if the
vehicle has been involved in an acci-
dent. This should be done even if no
damage is visible. Additional ques-
tions concerning seat belt operation
should be directed to your Hyundai
Dealer.
B160A01A-AAT
CARE OF SEAT BELTS
Seat belt systems should never be
disassembled or modified. In addition,
care should be taken to assure that
seat belts and belt hardware are not
damaged by seat hinges, doors or
other abuse.
This could cause serious internal
injuries.
For proper protection when the ve-
hicle is in motion, have the seatback
upright. Then sit back in the seat
and wear your seat belt properly.
See page 1-21
B160B01A-AAT
Periodic Inspection
It is recommended that all seat belts
be inspected periodically for wear or
damage of any kind. Parts of the sys-
tem that are damaged should be re-
placed as soon as possible.
WARNING:
When you return the rear seatback
to its upright position after the rear
seatback was folded down, be care-
ful not to damage the seat belt web-
bing or buckle. Be sure that the
webbing or buckle does not get
caught or pinched in the rear seat.
!
