manualshive.com logo in svg

Hyundai XG250, Owner'S Manual

The Yamaha XG250 Owner's Manual is an essential guide for owners of this powerful motorcycle. Easily downloadable, this manual is available for free on manualshive.com, providing users with comprehensive instructions to optimize their riding experience. Get the most out of your Yamaha XG250 by obtaining the manual today.

Share
Download
background image

DO-IT-YOURSELF MAINTENANCE  

  6- 13

G100A03L

G100A03Y-GAT

CHECKING THE TRANSAXLE
OIL (MANUAL)

Transaxle lubricant in the manual
transaxle should be checked at those
intervals specified in the vehicle main-
tenance schedule in Section 5.

Recommended Oil

Use only HYUNDAI GENUINE
PARTS MTF  75W/90 (API GL-4) in
the manual transaxle.

Manual Transaxle Oil Capacity

The oil capacity of the manual
transaxle is 2.1 liters (2.2 U.S. quarts).

Drain plug

Filler plug

WARNING:

It is always better to check the
transaxle oil level when the engine
is cool or cold. If the engine is hot,
you should exercise great caution
to avoid burning yourself on hot
engine or exhaust parts.

G100B01A-AAT

To check the Transaxle Fluid
Level

G100B01L

Park the car on level ground with the
engine off.

A good quality washer fluid should be
used to fill the washer reservoir. The
fluid level should be checked more
frequently during bad weather or
whenever the washer system is in
more frequent use.
The capacity of the washer reservoir
is 3.0 liters  (3.2 U.S. quarts).

CAUTION:

o Radiator antifreeze (engine cool-

ant) should not be used in the
washer system because it will
damage the car's finish.

o The washer lever should not be

pulled and the washer should
not be operated if the washer
reservoir is empty. This can dam-
age the washer fluid pump.

!

!

Summary of Contents for XG250







































































































































































































































Reviews:

No comments

Related manuals for XG250

J-Top COMPACT Instructions preview
COMPACT
Brand: J-Top Pages: 2
Vauxhall Meriva Quick Reference Manual preview
Meriva
Brand: Vauxhall Pages: 2
Vauxhall Ampera Quick Reference Manual preview
Ampera
Brand: Vauxhall Pages: 2
Vauxhall 2012 Agila Quick Reference Manual preview
2012 Agila
Brand: Vauxhall Pages: 2
Vauxhall 2013 Mokka Owner'S Manual preview
2013 Mokka
Brand: Vauxhall Pages: 209
VBC Racing WildFire Instruction Manual preview
WildFire
Brand: VBC Racing Pages: 34
Vauxhall 2013 Corsa Infotainment system Quick Reference Manual preview
2013 Corsa Infotainment system
Brand: Vauxhall Pages: 2
Vauxhall 2010 Astra Quick Reference Manual preview
2010 Astra
Brand: Vauxhall Pages: 2
Vauxhall Antara Owner'S Manual preview
Antara
Brand: Vauxhall Pages: 236
Brodit ProClip 804438 Installation Instructions preview
ProClip 804438
Brand: Brodit Pages: 2
Streetwize LeisureWize EMOVE EM303A Manual preview
LeisureWize EMOVE EM303A
Brand: Streetwize Pages: 20
Whipple TOMAHAWK V1 Instruction Manual preview
TOMAHAWK V1
Brand: Whipple Pages: 3
Waeco 8885100124 Operating Manual preview
8885100124
Brand: Waeco Pages: 172
VBG 56-201901 Mounting Instructions preview
56-201901
Brand: VBG Pages: 16
T-Mobile SyncUP DRIVE Start Manual preview
SyncUP DRIVE
Brand: T-Mobile Pages: 2
Magneti Marelli 350203061230 Installation Instruction preview
350203061230
Brand: Magneti Marelli Pages: 2
Kleinn RS-GM6 Installation Manual preview
RS-GM6
Brand: Kleinn Pages: 8
Ranger design 1525-PC Installation Manual preview
1525-PC
Brand: Ranger design Pages: 22

Brands by name

Popular brands

Load more brands