manualshive.com logo in svg

Hyundai XG250, Owner'S Manual

The Yamaha XG250 Owner's Manual is an essential guide for owners of this powerful motorcycle. Easily downloadable, this manual is available for free on manualshive.com, providing users with comprehensive instructions to optimize their riding experience. Get the most out of your Yamaha XG250 by obtaining the manual today.

Share
Download
background image

FEATURES OF YOUR HYUNDAI

   1- 17

Driver's seat

B100A01Y-AAT

SEAT WARMER (If installed)

HXG620

Passenger's seat

The seat warmer is provided to warm
the front seats during cold weather.
With the ignition key in the "ON" posi-
tion, push either of the switches to
warm the driver's seat or the
passenger's seat.
During mild weather or under condi-
tions where the operation of the seat
warmer is not needed, keep the
switches in the "OFF" position.

B110A01L

B140A03L

B140A01S-AAT

REAR SEAT WARNING

For the safety of all passengers, lug-
gage or other cargo should not be piled
higher than the top of the seatback. In
addition, do not place objects on the
rear shelf as they may move forward
during braking or in an accident and
strike vehicle passengers.

B110A01L-GAT

FOLDING REAR SEATBACKS

o To unlock the seatback, depress

the seatback locking button, then
pull forward on the seatback panel.

o When you return the seatback to its

upright position, always be sure it
has locked into position by pulling
and pushing on the top of the
seatback.

Summary of Contents for XG250







































































































































































































































Reviews:

No comments

Related manuals for XG250

GARO TWIN+ Assembly Instructions / End User Instruction preview
TWIN+
Brand: GARO Pages: 23
GARO LS4 Wallmounted Operational Instructions preview
LS4 Wallmounted
Brand: GARO Pages: 15
RaceChip XLR User Manual preview
XLR
Brand: RaceChip Pages: 20
Yakima Q46 Installation Instructions preview
Q46
Brand: Yakima Pages: 4
Kia CADENZA 2019 Features & Functions Manual preview
CADENZA 2019
Brand: Kia Pages: 54
Metra Electronics 99-9001 Installation Instructions preview
99-9001
Brand: Metra Electronics Pages: 2
Chevrolet Avalanche 2005 Owner'S Manual preview
Avalanche 2005
Brand: Chevrolet Pages: 494
TBC DPI1K User Manual preview
DPI1K
Brand: TBC Pages: 12
Axxess AX-AM-AU92 Installation Instructions Manual preview
AX-AM-AU92
Brand: Axxess Pages: 8
Marlon Xplore Pro II SxS Owner’S Manual Assembly & Installation Instructions preview
Xplore Pro II SxS
Brand: Marlon Pages: 15
Voxoa MCU-20A(P40) User Manual preview
MCU-20A(P40)
Brand: Voxoa Pages: 48
Buick Electra 225 1965 Service Manual preview
Electra 225 1965
Brand: Buick Pages: 914
Car-Systems Parktronic system Volkswagen Golf MK7 Assembly Manual preview
Parktronic system Volkswagen Golf MK7
Brand: Car-Systems Pages: 10
Camecho R0009 Instructions preview
R0009
Brand: Camecho Pages: 2
Eibach E60-82-007-02-10 Installation Instructions preview
E60-82-007-02-10
Brand: Eibach Pages: 3
ULTIMATE SPEED 279619 Instructions For Use And Safety Manuallines preview
279619
Brand: ULTIMATE SPEED Pages: 40
Thule RaceWay 991 Instructions Manual preview
RaceWay 991
Brand: Thule Pages: 12
GReddy 12519101 Instruction Manual preview
12519101
Brand: GReddy Pages: 12

Brands by name

Popular brands

Load more brands