2- 4
DRIVING YOUR HYUNDAI
C070C01E
C070C01A-AAT
To Remove The Ignition Key
1. Turn the ignition key to the "ACC"
position.
2. Simultaneously push and turn the
ignition key counterclockwise from
the "ACC" position to the "LOCK"
position.
3. The key can be removed in the
"LOCK" position.
C050A01A-AAT
STARTING
C050A01E
WARNING:
Never run the engine in a closed or
poorly ventilated area any longer
than is needed to move your car in
or out of the area. The carbon mon-
oxide gas emitted is odorless and
can cause serious injury or death.
LOCK
ACC
ON
START
o "START"
The engine is started in this position. It
will crank until you release the key.
NOTE:
Do not hold the key in the "START"
position for more than 15 seconds.
o "ON"
When the key is in the "ON" position,
the ignition is on and all accessories
may be turned on. If the engine is not
running, the key should not be left in
the "ON" position. This will discharge
the battery and may also damage the
ignition system.
o "ACC"
With the key in the "ACC" position,
some electrical accessories (radio, etc.)
may be operated.
o "LOCK"
The key can be removed or inserted in
this position.
To protect against theft, the steering
wheel locks by removing the key.
NOTE:
To unlocking the steering wheel,
insert the key, and then turn the
steering wheel and key simulta-
neously.
!
