manualshive.com logo in svg

Hyundai XG250, Owner'S Manual

The Yamaha XG250 Owner's Manual is an essential guide for owners of this powerful motorcycle. Easily downloadable, this manual is available for free on manualshive.com, providing users with comprehensive instructions to optimize their riding experience. Get the most out of your Yamaha XG250 by obtaining the manual today.

Share
Download
background image

FEATURES OF YOUR HYUNDAI

   1- 73

The cruise control system provides
automatic speed control for your com-
fort when driving on freeways, tollroads,
or other noncongested high ways. This
is designed to function above approxi-
mately 40 km/h (25 mph).

B660B01L

B660B01L-GAT

To Set the Cruise Speed

1. Push in the cruise control main

switch. This turns the system on.

2. Accelerate to desired cruising speed

above 40 km/h (25 mph).

3. Push the control switch "SET"

(COAST) position. The "CRUISE"
indicator light in the instrument clus-
ter will illuminate after you have set
the vehicle speed at the desired
speed.

4. Remove your foot from the accel-

erator pedal and the desired speed
will automatically be maintained.

5. To increase speed, depress the ac-

celerator pedal enough for the ve-
hicle to exceed the preset speed.
When you remove your foot from
the accelerator pedal, the vehicle
will return to the speed you have
set.

B660C02L-GAT

To Cancel the Cruise Speed

Do one of the following:
o Push the control switch "CANCEL".
o Depress the brake pedal.
o Depress the clutch pedal

(Manual transaxle).

o Shift the selector lever in "P" or "N"

position (Automatic transaxle).

o Decrease the vehicle speed lower

than memory speed by 15 km/h (9
mph).

o Decrease the vehicle speed approxi-

mately to less than 40 km/h (25
mph).

o Release the main switch.

B660C01L

Summary of Contents for XG250







































































































































































































































Reviews:

No comments

Related manuals for XG250

Jeep 2014 Wrangler Owner'S Manual preview
2014 Wrangler
Brand: Jeep Pages: 673
Fabbri BICI OK 2 Quick Start Manual preview
BICI OK 2
Brand: Fabbri Pages: 4
Pivot DXB-B User Manual preview
DXB-B
Brand: Pivot Pages: 4
Farad BARS PR25 - 2 Quick Start Manual preview
BARS PR25 - 2
Brand: Farad Pages: 8
Victory 4x4 UNI-UPRS Install Instructions Manual preview
UNI-UPRS
Brand: Victory 4x4 Pages: 13
BGS technic 40108 Manual preview
40108
Brand: BGS technic Pages: 5
Oldsmobile 1999 88 Owner'S Manual preview
1999 88
Brand: Oldsmobile Pages: 344
ABL eMH3 Installation Manual preview
eMH3
Brand: ABL Pages: 66
Havis-Shields 1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28 Install Instructions preview
1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28
Brand: Havis-Shields Pages: 3
GMC Envoy XUV 2004 Getting To Know Manual preview
Envoy XUV 2004
Brand: GMC Pages: 20
Firestone Ride-Rite Air Helper Springs 2173 Installation Instructions preview
Ride-Rite Air Helper Springs 2173
Brand: Firestone Pages: 4
Hyundai Santa Fe 2006 Owner'S Manual preview
Santa Fe 2006
Brand: Hyundai Pages: 280
Yakima Landing Pad 24 Quick Start Manual preview
Landing Pad 24
Brand: Yakima Pages: 11
Skoda Superb 2006 Owner'S Manual preview
Superb 2006
Brand: Skoda Pages: 281
r.LiNK RL2-NBT Manual preview
RL2-NBT
Brand: r.LiNK Pages: 20
Subaru SPN0001105 User Manual preview
SPN0001105
Brand: Subaru Pages: 44
Edelbrock 5756 Installation Instructions preview
5756
Brand: Edelbrock Pages: 1
Gacell SLH 27C User Manual preview
SLH 27C
Brand: Gacell Pages: 25

Brands by name

Popular brands

Load more brands