Hyundai Starex H-1 2004, Owner'S Manual, Page: 55 / 273

1
BEFORE DRIVING YOUR VEHICLE
41
B370D01P-GAT
2-Point System with Non-Lock-
ing Retractor (If installed)
This type of seat belts are equipped
with an Non-Locking Retractor.
Holding the latch plate by hand, pull it
out until the webbing is fully extended
and insert the latch plate into the buckle.
When it fits snugly around your hip, the
webbing with the latch plate is auto-
matically retracted. To release, unfas-
ten the belt, and a light tug to the
webbing with the latch plate will cause
the retractor to work automatically.
HFC2085
B180B01X-GAT
Pre-tensioner Seat Belt
(If installed)
Ordinarily the pre-tensioner seat belt
operates in the same way as E.L.R
(Emergency Locking Retractor) type
(When vehicles stop suddenly, the
belt will lock into the position. It will
also lock if you try to lean forward
too quickly.)
.
However, when vehicles crash, the
retractor rewinds the belt webbing.
This will restrain the passenger move-
ment quickly and also reduce the slack
between passenger and belt webbing.
B180B02A
B370E01P-GAT
2-point Static Type (If installed)
The seat belts should be adjusted by
holding the belt and latch plate at right
angles to each other, and then pulling
the belt as illustrated below to a snug
fit around the occupant.
Holding the latch plate by hand, insert
the latch plate into the buckle.
Loosen
GS10530A
Tighten