
3
STARTING AND OPERATING
5
C051A01O-GAT
Starting For The Diesel Engine
ENGINE COLD
o Turn the ignition key to position
"ON" and wait for the pre-heat indi-
cator light to go out.
o Operate the starter until the engine
runs.
ENGINE WARM
Operate the starter. If the engine does
not respond on the first attempt, wait
several seconds and try again using
the pre-heat.
NOTE:
If the engine was not started 10
seconds after the preheating is com-
pleted, turn the ignition key once
more to the "LOCK" position, and
then to the "ON" position, in order
to preheat again.
C050B01HP
Amber lamp ON
Amber lamp OFF
C050B02S-GAT
NORMAL CONDITIONS
The Starting Procedure:
1. Insert key, and fasten the seat belt.
2. Depress the clutch pedal fully and
place the gearshift lever (manual
transmission) in neutral or the se-
lector lever (automatic transmission)
in "P" (park) position.
3. After turning the ignition key to the
"ON" position, make certain all warn-
ing lights and gauges are function-
ing properly before starting the en-
gine.
4. On vehicles equipped with the die-
sel preheat indicator light, turn the
ignition key to the "ON" position.
The diesel pre-heat indicator light
will first illuminate in amber, and
then after a short time, the amber
illumination will goes off, indicating
that preheating is completed.
Summary of Contents for Starex H-1 2004
