Hyundai Starex H-1 2004, Owner'S Manual, Page: 111 / 273

2
INSTRUMENTS AND CONTROLS
46
C720A01P-GAT
Main switch for the rear heater
The main switch for the rear heater is
installed in the instrument panel.
The main switch should be used to
switch the power of the rear heater
"ON" and "OFF".
The power is switched "ON" when the
button is pressed, and the lamp within
the switch is illuminated. Illumination
will stop and the power will be switched
"OFF" when the button is pressed
once again.
C720A01P
C730A02P-GAT
Control panel
Rotary type
Lever type
C730A02P
C730A02P-1
1
2 3
1
2
3
1. Temperature controller
Rotary type- Select the desired tem-
perature by turn the
knob left or right.
Lever type - Select the desired tem-
perature by sliding the
lever left or right.
Red - High temperaute (heating)
Blue - Ambient temperature
(ventilating)
2. Mode selector lever
Air flow can be switched in three
modes.
Three symbols are used to repre-
sent Floor level, Bi-level and Face
level.
3. Blower controller
The blower can be operated (when
the ignition key and main switch for
the rear heater is at the "ON" posi-
tion) at three speeds to regulate the
amount of air forced through the
vehicle.
The blower speed will increase as
the switch is moved to the right.