
8
DO-IT YOURSELF MAINTENANCE
9
!
I060A01P-GAT
To Check the Oil Level
If the oil level is below the specified
limit, remove the cap located on the
cylinder head cover and add enough
oil to raise the level to within the
specified range. Be sure to use the
specified engine oil and do not mix
various types of oil. Also, avoid mix-
ing different makes of oil together if
possible. After adding oil, close the
cap securely.
It is important to check the oil level at
regular intervals or before starting a
long trip.
This check must be made with the
engine warm but not running. Park
the vehicle on a level surface, stop
the engine, and then wait a few mo-
ments to allow the engine oil in circu-
lation to return to the oil pan to ensure
accurate measurement. Remove the
dipstick and wipe it with a clean cloth.
Reinsert the dipstick and read the oil
level, which should always be within
the range indicated in the figure.
WARNING:
Be careful not to touch the hot
exhaust manifold.
CAUTION:
Slowly pour the recommended oil
using by a funnel. Do not overfill
not to damage engine.
NOTE:
Check the oil level on the dipstick
once again after adding the oil.
!
I060A01P
I060B02P
Summary of Contents for Starex H-1 2004
