Hyundai Starex H-1 2004, Owner'S Manual, Page: 118 / 273

2
INSTRUMENTS AND CONTROLS
53
HOW TO PRESET STATIONS
Six AM and twelve FM stations may be
programmed into the memory of the
radio. Then, by simply pressing the
band select button and/or one of the
six station select buttons, you may
recall any of these stations instantly.
To program the stations, follow these
steps:
o Press band selector to set the band
for AM, FM1, or FM2.
o Select the desired station to be
stored by seek or manual tuning.
o Determine the preset station select
button you wish to use to access
that station.
o Press the station select button for
more than two seconds. A select
button indicator will show in the dis-
play indicating which select button
you have depressed. The frequency
display will flash after it has been
stored into the memory with beep
sound. You should then release the
button, and proceed to program the
next desired station. A total of 18
stations can be programmed by se-
lecting one AM and two FM stations
per button.
o When completed, any preset sta-
tion may be recalled by selecting
AM, FM1 or FM2 band and the
appropriate station button.
7. SCAN Button
When the scan button is pressed, the
frequency will be increased and the
receivable stations will be tuned in one
after another, receiving each station
for 5 seconds. To stop scanning, press
the scan button again.
!
CAUTION:
o Do not place beverages close to
the audio system. The playback
mechanism may be damaged if
you spill them.
o Do not impact on the audio sys-
tem, or the playback mechanism
could be damaged.