![background image](http://html1.mh-extra.com/html/hyundai/n800-series/n800-series_installation-manual_2196572097.webp)
7. TECHNICAL DATA
91
7.2 N800A - TECHNICAL DATA
Table 36: The technical data of the N800A AC drive
208...240 V; 380…500 V; -10%…+10%
0-320 Hz (standard)
0.01 Hz
MR4 to MR6: 1.5...10 kHz
Defaults
• MR4 to MR6: 6 kHz (except for 0012 2, 0031 2,
0062 2, 0012 5, 0031 5 and 0061 5: 4 kHz)
MR7 to MR9: 1.5-6 kHz
Defaults
• MR7: 4 kHz
• MR8: 3 kHz
• MR9: 2 kHz
Automatic switching frequency derating in case of overload.
Resolution 0.1% (10-bit), accuracy ±1%
Resolution 0.01 Hz
8…320 Hz
0.1…3000 sec
0.1…3000 sec
I
L
current: -10°C (no frost)...+40 °C
I
H
current: -10°C (no frost)...+50 °C
Maximum operating temperature: +50 °C
-40 °C…+70 °C
0-95% RH, non-condensing, non-corrosive
Tested according to IEC 60068-2-60 Test Ke: Flowing
mixed gas corrosion test, Method 1 (H2S [hydrogen
sulfide] and SO2 [sulfur dioxide])
Designed according to
• IEC 60721-3-3, unit in operation, class 3C3
(IP21/UL Type 1 Models 3C2)
• IEC 60721-3-3, unit in operation, class 3S2
Ambient operating tem-
perature
Storage temperature
Relative humidity
Air quality:
• chemical vapours
• mechanical particles
50...60 Hz -5...+10%
Once per minute or less
6s (MR4 - MR6); 8s (MR7 - MR9)
0-Uin
I
L
: Ambient temperature max. +40 °C overload 1.1 x I
L
(1 min/10 min)
I
H
: Ambient temperature max. +50 °C overload 1.5 x I
H
(1 min/10 min)
Input voltage Uin
Output frequency
Frequency resolution
Switching frequency
Frequency reference
Analogue input
Panel reference
Field weakening point
Acceleration time
Deceleration time
Input frequency
Connection to mains
Starting delay
Output voltage
Continuous output
current
Mains con-
nection
Control
qualities
Ambient con-
ditions
Motor con-
nection
N800A
Summary of Contents for N800 Series
