Hyundai N800 Series, Installation Manual

Page: 48 / 102

4. POWER CABLING
42
7) Put the cable entry plate with the cables into the groove on
the frame of the drive.
8) Connect the stripped cables.
a) Expose the shield of all the 3 cables to make a 360-degree
connection with the cable clamp.
b) Connect the phase conductors of the mains cable and of
the motor cable, and the conductors of the the brake resistor
cable into the correct terminals.
c) Attach the earth conductor of each cable to an earth termi
nal with a clamp.
d) See the correct tightening torques in Table 21.
A. The cable clamp D. The mains cable
B. The terminals E. The brake resistor cable
C. The earth terminal F. The motor cable
N800A