Hyundai i20 Active 2016 Owner'S Manual Download Page 111 | Manualshive

Page: 111 / 303

background image

%#

-,&/,)/,*.'/"*(+/$.-'.-(+.&/) !/

E

Engine Oil Pressure
Warning Light

This warning light illuminates:

• Once you set the ignition switch or

Engine Start/Stop button to the ON
position.
- It remains on until the engine is

started.

• When the engine oil pressure is

low.

If the engine oil pressure is low:

1.Drive carefully to the nearest safe

location and stop your vehicle.

2.Turn the engine off and check the

engine oil level (For more details,
refer to “Engine Oil” in chapter 9). If
the level is low, add oil as required.
If the warning light remains on after
adding oil or if oil is not available,
we recommend that you have the
vehicle inspected by an authorized
HYUNDAI dealer as soon as possi-
ble.

- Engine Oil Pressure

Warning Light

• If the engine does not stop imme-

diately  after  the  Engine  Oil
Pressure  Warning  Light  is  illumi-
nated,  severe  damage  could
result.

• If the warning light stays on while

the  engine  is  running,  it  indicates
that  there  may  be  serious  engine
damage  or  malfunction.  In  this
case,
1. Stop the vehicle as soon as it is

safe to do so.

2. Turn off the engine and check

the oil level. If the oil level is low,
fill the engine oil to the proper
level.

3. Start the engine again. If the

warning  light  stays  on  after  the
engine is started, turn the engine
off  immediately. In this  case, we
recommend  that  you  have  the
vehicle  inspected  by  an  author-
ized HYUNDAI dealer.

Low Fuel Level Warning
Light

This warning light illuminates:

When the fuel tank is nearly empty.

If the fuel tank is nearly empty, add
fuel as soon as possible.

- Low Fuel Level

Driving  with  the  Low  Fuel  Level
warning light on or with the fuel level
below  “E  (Empty)”  can  cause  the
engine  to  misfire  and  damage  the
catalytic converter (if equipped).

NOTICE

NOTICE

«
...
109
110
111
112
113
...
»

Summary of Contents for i20 Active 2016
















































































































































































































































































































Reviews:

No comments

Related manuals for i20 Active 2016

SP200 - QUICKSTART GUIDE 1

Brand: Jabra Pages: 2

BT150 - Headset - Over-the-ear

Brand: Jabra Pages: 2

Brand: Yakima Pages: 11

Brand: Westin Pages: 3

ESCALADE FAMILY - SPECIFICATIONS 2011

Brand: Cadillac Pages: 1

CARPOWER CAP-12XHQ

Brand: Monacor Pages: 5

Grand Cherokee WK2

Brand: Jeep Pages: 338

3-series convertible

Brand: BMW Pages: 98

Brand: Dacia Pages: 238

Brand: AC Schnitzer Pages: 16

Q Access Alpha GSE 2023

Brand: Q Mobility Group Pages: 9

Truck Training Model

Brand: WABCO Pages: 56

Brand: C-KO Pages: 4

Brand: Paser Pages: 2

Brand: Xblitz Pages: 56

Brand: APS Pages: 3

Brand: Gator Pages: 6

Brand: F.lli Menabo Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands