Hyundai i20 Active 2016 Owner'S Manual Download Page 197

Page: 197 / 303

(+
'+%#)

"()

'*+ !*

Button Position

Action

Notice

OFF

• To turn off the engine, stop the vehicle and

then press the Engine Start/Stop button.

• The steering wheel locks to protect the

vehicle from theft.

If the steering wheel is not locked properly
when you open the driver's door, the warning
chime will sound.

Not illuminated

ACC

• Press the Engine Start/Stop button when

the button is in the OFF position without
depressing the clutch pedal.

• Electrical accessories are usable.
• The steering wheel unlocks.

• If you leave the Engine Start/Stop button in

the ACC position for more than one hour, the
battery power will turn off automatically to
prevent the battery from discharging.

• If the steering wheel doesn't unlock properly,

the Engine Start/Stop button will not work.
Press the Engine Start/Stop button while
turning the steering wheel right and left to
release tension.

Amber indicator

Engine Stop/Start button positions

- Vehicle with manual transaxle

Summary of Contents for i20 Active 2016
















































































































































































































































































































Search results

Summary of Contents for i20 Active 2016

Reviews:

Related manuals for i20 Active 2016

Brands by name

Popular brands

Hyundai i20 Active 2016, Owner'S Manual

Search results

Summary of Contents for i20 Active 2016

Reviews:

Related manuals for i20 Active 2016

Brands by name

Popular brands