Hyundai i20 Active 2016 Owner'S Manual Download Page 201 | Manualshive

Page: 201 / 303

background image

&$

(+
'+%#)

"()

'*+ !*

S

Starting the engine

Information

• The engine will start by pressing the

Engine Start/Stop button, only when
the smart key is in the vehicle.

• Even if the smart key is in the vehi-

cle, if it is far away from the driver,
the engine may not start.

• When the Engine Start/Stop button

is in the ACC or ON position, if any
door is open, the system checks for
the smart key. If the smart key is not
in the vehicle, the "

" indicator

will blink and the warning "Key not
in vehicle" will come on, and if all
doors are closed, the chime will also
sound for about 5 seconds. The indi-
cator will turn off while the vehicle
is moving. Keep the smart key in the
vehicle when using the ACC position
or if the vehicle engine is ON.

Starting the petrol engine

Vehicle with manual transaxle:
1. Always carry the smart key with

you.

2. Make sure the parking brake is

applied.

3. Make sure the shift lever is in neu-

tral.

4. Depress the clutch and brake ped-

als.

5. Press the Engine Start/Stop but-

ton.

Vehicle with automatic transaxle:
1.Always carry the smart key with

you.

2.Make sure the parking brake is

applied.

3.Make sure the shift lever is in P

(Park).

4.Depress the brake pedal.
5 Press the Engine Start/Stop but-

ton.

i

•

Always  wear  appropriate  shoes
when  operating  your  vehicle.
Unsuitable  shoes,  such  as  high
heels,  ski  boots,  sandals,  flip-
flops,  etc.,  may  interfere  with
your  ability  to  use  the  brake,
accelerator and clutch pedals.

•

Do not start the vehicle with the
accelerator pedal depressed. The
vehicle can move and lead to an
accident.

•

Wait until the engine rpm is nor-
mal. The vehicle may suddenly
move if the brake pedal is
released when the rpm is high.

WARNING

«
...
199
200
201
202
203
...
»

Summary of Contents for i20 Active 2016
















































































































































































































































































































Reviews:

No comments

Related manuals for i20 Active 2016

Brand: Vauxhall Pages: 2

Brand: FormFit Pages: 4

Brand: Edelbrock Pages: 2

Transit Vancouver Wagon

Brand: Webasto Pages: 44

Brand: Actia Pages: 37

Brand: minnid Pages: 44

Brand: PAC Pages: 4

Brand: BURY Pages: 2

Truck Training Model

Brand: WABCO Pages: 56

Brand: DriveRight Pages: 16

Brand: POOL-LINE Pages: 2

Brand: AL-KO Pages: 40

Brand: Thule Pages: 8

Cuda TriOptic 351014F Series

Brand: Federal Signal Corporation Pages: 4

Brand: Kia Pages: 216

Brand: Whelen Engineering Company Pages: 2

Brand: Saab Pages: 9

SH-TENT-GRAY-AHT125

Brand: SAN HIMA Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands