Hyundai i20 Active 2016 Owner'S Manual Download Page 147

Page: 147 / 303

%#%

&/,)/,*

.'/

*(+
/$

.-'

-(+
.&

/) !/

Manual climate control system

To defog inside windshield

1. Select desired fan speed.
2. Select desired temperature.
3.

Select

the or position.

4. The outside (fresh) air will be select-

ed automatically. Additionally, the air
conditioning (if equipped) will auto-
matically operate if the mode is
selected to the

position.

If the air conditioning and outside
(fresh) air position are not selected
automatically, press the correspon-
ding button manually.

To defrost outside windshield

1. Set the fan speed to the highest

(extreme right) position.

Set the temperature to the
extreme hot position.

3. Select the

position.

4. The outside (fresh) air and air con-

ditioning (if equipped) will be
selected automatically.

Automatic climate control system

To defog inside windshield

1. Select desired fan speed.
2. Select desired temperature.
3. Press the defroster button (

4. The air-conditioning will turn on

according to the detected ambient
temperature, outside (fresh) air
position and higher fan speed will
be selected automatically.

OIB044076

OIB044077

OIB044089

Summary of Contents for i20 Active 2016
















































































































































































































































































































Search results

Summary of Contents for i20 Active 2016

Reviews:

Related manuals for i20 Active 2016

Brands by name

Popular brands

Hyundai i20 Active 2016, Owner'S Manual

Search results

Summary of Contents for i20 Active 2016

Reviews:

Related manuals for i20 Active 2016

Brands by name

Popular brands