Hyundai i20 Active 2016 Owner'S Manual Download Page 161

Page: 161 / 303

Steering wheel audio control
(if equipped)

The steering wheel audio control but-
ton is installed to promote safe driving.

Do not operate audio remote control
buttons simultaneously.

VOLUME (VOL +/-) (1)

• Press the up button (+) to increase

volume.

• Press the down button (-) to

decrease volume.

SEEK/PRESET (

) (2)

If the SEEK/PRESET button is
pressed for 0.8 second or more, it
will work as follows in each mode.

RADIO mode

It will function as the AUTO SEEK
select button. It will SEEK until you
release the button.

CDP mode

It will function as the FF/REW button.

If the SEEK/PRESET button is
pressed for less than 0.8 second, it
will work as follows in each mode.

RADIO mode

It will function as the PRESET STA-
TION select buttons.

CDP mode

It will function as the TRACK
UP/DOWN button.

MODE (3)

Press the MODE button to select
Radio, CD (Compact Disc) or AUX
(Auxiliary, if equipped).

MUTE (4, if equipped)

• Press the button to mute the

sound.

• Press the button to turn off the

microphone during a telephone
call.

Detailed information for audio control
buttons is included in the following
pages in this chapter.

NOTICE

&%#$%" &$#

OIB044037

OIB044168

Type A

Type B

Summary of Contents for i20 Active 2016
















































































































































































































































































































Search results

Summary of Contents for i20 Active 2016

Reviews:

Related manuals for i20 Active 2016

Brands by name

Popular brands

Hyundai i20 Active 2016, Owner'S Manual

Search results

Summary of Contents for i20 Active 2016

Reviews:

Related manuals for i20 Active 2016

Brands by name

Popular brands