Hyundai i20 Active 2016 Owner'S Manual Download Page 171

Page: 171 / 303

&%#$%"

&$#

IInformation
-

Precautions for safe driving

•

Bluetooth

Handsfree is a feature

that enables drivers to practice safe
driving. Connecting the head unit
with a

Bluetooth

phone allows the

user to conveniently make and
receive calls and use contacts.
Before using

Bluetooth

, carefully

read the contents of this user’s man-
ual.

• Excessive use or operations while

driving may lead to negligent driv-
ing practices and result in accidents.
Refrain from excessive operations
while driving.

• Viewing the screen for prolonged

periods of time is dangerous and
may lead to accidents. When driv-
ing, view the screen only for short
periods of time.

Information
-

When connecting a

Bluetooth

phone

• Before connecting the head unit

with the mobile phone, check to see
that the mobile phone supports

Bluetooth

features.

• Even if the phone supports

Bluetooth

, the phone will not be

found during device searches if the
phone has been set to hidden state
or the

Bluetooth

power is turned

off. Disable the hidden state or turn
on the

Bluetooth

power prior to

searching/connecting with the Head
unit.

• Bluetooth phone is automatically

connected when the ignition on.

• If you do not want automatic con-

nection with your

Bluetooth

device,

turn off the

Bluetooth

feature with-

in your mobile phone.

• The Handsfree call volume and

quality may differ depending on the
mobile phone.

(Continued)

• Park the vehicle when connecting

the head unit with the mobile phone.

•

Bluetooth

connection may become

intermittently disconnected in some
mobile phones. Follow these steps to
try again.

1. Within the mobile phone, turn the

Bluetooth

function off/on and try

again.

2. Turn the mobile phone power

Off/On and try again.

3. Completely remove the mobile

phone battery, reboot, and then
again.

4. Reboot the Audio System and try

again.

5. Delete all paired devices, pair and

try again.

• Handsfree call quality and volume

may differ depending on the model
of your mobile phone.

Summary of Contents for i20 Active 2016
















































































































































































































































































































Search results

Summary of Contents for i20 Active 2016

Reviews:

Related manuals for i20 Active 2016

Brands by name

Popular brands

Hyundai i20 Active 2016, Owner'S Manual

Search results

Summary of Contents for i20 Active 2016

Reviews:

Related manuals for i20 Active 2016

Brands by name

Popular brands