![background image](http://html1.mh-extra.com/html/hyundai/hpt-4205/hpt-4205_service-manual_2197045010.webp)
8
Plasma TV Service Manual
14/03/2005
Possibility of MAC or chroma signal for each input by switching-off the clamp with an external resistor
bridge
Bus controlled
6.5dB gain between any input and output
55dB crosstalk at 5mHz
Fully ESD protected
12.4.3. Pinning
1.
Input
:
Max
: 2Vpp, Input Current: 1mA, Max : 3mA
2.
Data
:
Low level
: -0.3V Max: 1.5V,
High level
: 3.0V Max
: Vcc+0.5V
3.
Input
:
Max
: 2Vpp, Input Current: 1mA,
Max
: 3mA
4.
Clock
:
Low level
: -0.3V Max: 1.5V,
High level
: 3.0V Max
: Vcc+0.5V
5.
Input
:
Max
: 2Vpp, Input Current: 1mA, Max : 3mA
6.
Input
:
Max
: 2Vpp, Input Current: 1mA, Max : 3mA
7.
Prog
8.
Input
:
Max
: 2Vpp, Input Current: 1mA, Max: 3mA
9.
Vcc
:
12V
10.
Input
:
Max
: 2Vpp, Input Current: 1mA, Max : 3mA
11.
Input
:
Max
: 2Vpp, Input Current: 1mA, Max : 3mA
12.
Ground
13.
Output :
5.5Vpp,
Min : 4.5Vpp
14.
Output :
5.5Vpp,
Min : 4.5Vpp
15.
Output :
5.5Vpp,
Min : 4.5Vpp
16.
Output :
5.5Vpp,
Min : 4.5Vpp
17.
Output :
5.5Vpp,
Min : 4.5Vpp
18.
Output :
5.5Vpp,
Min : 4.5Vpp
19.
Ground
20.
Input
:
Max : 2Vpp, Input Current
: 1mA, Max
: 3mA
12.5.
SAA3010T
12.5.1. Description
The SAA3010 is intended as a general purpose (RC-5) infrared remote control system for use where a low
voltage supply and a large debounce time are expected. The device can generate 2048 different commands
and utilizes a keyboard with a single pole switch for each key. The commands are arranged so that 32
systems can be addressed, each system containing 64 different commands. The circuit response to legal
(one key pressed at a time) and illegal (more than one key pressed at a time) keyboard operation is specified
in the section
Keyboard operation
.
12.5.2. Features
Low voltage requirement
Biphase transmission technique
Single pin oscillator
Test mode facility
12.5.3. Pinning
Pin
Mnemonic
Function
1
X7 (IPU)
sense input from key matrix
2
SSM (I)
sense mode selection input
3
Z0-Z3 (IPU)
sense inputs from key matrix
7
MDATA (OP3)
generated output data modulated with 1/12 the oscillator frequency at a 25% duty factor
8
DATA (OP3)
generated output information
9-13
DR7-DR3 (ODN)
Scan drivers
14
VSS
Ground (0V)
15-17
DR-2-DR0 (ODN)
Scan drivers
18
OSC (I)
Oscillator input
19
TP2 (I)
test point 2
Summary of Contents for HPT-4205
