![background image](http://html1.mh-extra.com/html/hyundai/hpt-4205/hpt-4205_service-manual_2197045020.webp)
18
Plasma TV Service Manual
14/03/2005
12.16. TL431
12.16.1. Description
The TL431 is a 3-terminal adjustable shunt voltage regulator providing a highly accurate 1 % band gap
reference. TL431 acts as an open-loop error amplifier with a 2.5V temperature compensation reference.
The TL431 thermal stability, wide operating current (150mA) and temperature range (0.to 105.makes it
suitable for all variety of application that are looking for a low cost solution with high performance. The
output voltage may be adjusted to any value between VREF and 36 volts with two external resistors.
The TL431 is operating in full industrial temperature range of 0°C to 105°C. The TL431 is available in
TO-92, SO-8, SOT-89 and SOT23-5 packages.
12.16.2. Features
Trimmed Band gap to 1%
Wide Operating Current
1mA to 150mA
Extended Temperature Range
0. °C to 105.°C
Low Temperature Coefficient
30 ppm /°C
Offered in TO-92, SOIC, SOT-89, SOT-23-5
Improved Replacement in Performance for TL431
Low Cost Solution
12.16.3. Pin Configurations
12.17. MSP34X0G (MSP3410G)
Multistandard Sound Processor Family
12.17.1. Introduction
The MSP 34x0G family of single-chip Multistandard Sound Processors covers the sound processing of
all analog TV-Standards worldwide, as well as the NICAM digital sound standards. The full TV sound
processing, starting with analog sound IF signal-in, down to processed analog AF-out, is performed on
a single chip. Figure shows a simplified functional block diagram of the MSP 34x0G.
This new generation of TV sound processing ICs now includes versions for processing the multichannel
television sound (MTS) signal conforming to the standard recommended by the Broadcast Television
Systems Committee (BTSC). The DBX noise reduction, or alternatively, MICRONAS Noise Reduction
(MNR) is performed alignment free. Other processed standards are the Japanese FM-FM multiplex
standard (EIA-J) and the FM Stereo Radio standard. Current ICs have to perform adjustment
procedures in order to achieve good stereo separation for BTSC and EIA-J. The MSP 34x0G has
optimum stereo performance without any adjustments.
All MSP 34x0G versions are pin and software downward compatible to the MSP 34x0D. The MSP
34x0G further simplifies controlling software. Standard selection requires a single I
²
C transmission only.
The MSP 34x0G has built-in automatic functions: The IC is able to detect the actual sound standard
automatically (Automatic Standard Detection). Furthermore, pilot levels and identification signals can be
evaluated internally with subsequent switching between mono/stereo/bilingual; no I
²
C interaction is
necessary (Automatic Sound Selection).
Summary of Contents for HPT-4205
