![background image](http://html1.mh-extra.com/html/hyundai/hpt-4205/hpt-4205_service-manual_2197045005.webp)
3
Plasma TV Service Manual
14/03/2005
7. POWER SUPPLY (SMPS)
The DC voltages required at various parts of the chassis are provided by an SMPS transformer
controlled by the IC MC44608, which is designed for driving, controlling and protecting switching
transistor of SMPS. The transformer generates 145V for FBT input, +/-14V for audio amplifier, 5V and
3.3V stand by voltage and 8V, 12V and 5V supplies for other different parts of the chassis.
An optocoupler is used to control the regulation of line voltage and stand-by power consumption. There
is a regulation circuit in secondary side. This circuit produces a control voltage according to the
changes in 145V DC voltage, via an optocoupler (TCET1102G) to pin3 of the IC.
During the switch on period of the transistor, energy is stored in the transformer. During the switch off
period energy is fed to the load via secondary winding. By varying switch-on time of the power
transistor, it controls each portion of energy transferred to the second side such that the output voltage
remains nearly independent of load variations.
8. MICROCONTROLLER
The microprocessor is embedded inside PW181 chip which also handles scaling, frame rate conversion
and OSD generation. The on-chip 16-bit microprocessor is a Turbo x86-compatible processor core with
on-chip peripherals (timers, interrupt controller, 2-wire serial master/slave interface, UART, I/O ports,
and more). Special peripherals such as Infrared (IR) pulse decoders and a digital pulse width modulator
(PWM) are also included. There are two independent 2-wire serial master/slave interface modules that
can be multiplexed to control up to five 2-wire serial ports. The slave 2-wire interface is designed for
HDCP use only (and requires the use of HDCP Image Processors). On-chip RAM of up to 64 Kbytes is
available. A complete microprocessor system can be implemented simply by adding external ROM. The
on-chip processor can be disabled to allow external processor control of all internal functions.
9. SERIAL ACCESS CMOS 4K x 8 (32K bit) EEPROM 24C32A
The Microchip Technology Inc. 24C32A is a 4K x 8 (32K bit) Serial Electrically Erasable PROM. It has
been developed for advanced, low power applications such as personal communications or data
acquisition. The 24C32A also has a page-write capability of up to 32 bytes of data. The 24C32A is
capable of both random and sequential reads up to the 32K boundary. Functional address lines allow
up to eight 24C32A devices on the same bus, for up to 256K bits address space. Advanced CMOS
technology and broad voltage range make this device ideal for low-power/low-voltage, non-volatile code
and data applications.
10. CLASS AB STEREO HEADPHONE DRIVER TDA1308
The TDA1308 is an integrated class AB stereo headphone driver contained in a DIP8 plastic package.
The device is fabricated in a 1 mm CMOS process and has been primarily developed for portable digital
audio applications.
11. SAW FILTERS
K9656M:
Standard:
B/G
D/K
I
L/L
Features
TV IF audio filter with two channels
Channel 1 (L
) with one pass band for sound carriers at 40.40 MHz (L
) and 39.75 MHz (L
- NICAM)
Channel 2 (B/G, D/K, L, I) with one pass band for sound carriers between 32.35 MHz and 33.40 MHz
Terminals
Tinned CuFe alloy
Pin configuration
1 Input
2 Switching input
3 Chip carrier - ground
4 Output
5 Output
Summary of Contents for HPT-4205
