Using the Remote Control
13
Using the Remote Control
12
Controls/Functions
Controls/Functions
Ȟ
How to insert batteries
͈
Open the cover.
͉
Insert two AAA type batteries(1.5V) to be aligned with appro/-
polarity.
͊
Close the cover completely.
Ȟ
When to replace batteries
If the Remote control doesn’t operate as well,it indicates batteries are
almost out.
Replace both batteries.
Ȟ
How to replace batteries
͈
Check +/- polarities and insert batteries to be aligned with appropriate
+/- polarity.
͉
Even if old and new batteries are the same type, do not use batteries
from different makers.
Ȟ
Accident prevention
͈
Do not recharge, heat or disassemble the battery. Do not cross +/-
polarities.
͉
If remote controller is not going to be used for a long time, take the
batteries out.
5.1
Batteries
͈
The remote controller can be detected by the receiver within 30
degrees to the left or right.
͉
The transmission distance of the remote control is 7m in direct line of
sight.
ņ
Notes :
͈
When the remote control is not operative
Replace batteries with new ones and check AC power plug on the
receiver.
͉
Abnormal operation
Ensure that other products which might cause interference are placed
further away from the receiver.
͊
Notes for handling
If exposed to heat or water, the main body and the remote control may
be damaged, so be careful.
5.2
Range of Operation
4.4
Remote Control Unit
/
/ : To move the cursor
up/down or left/right To change the value of a
selected item.
OK
: To select an item or to confirm a menu.
To choose a channel from the channel list
mode.
INFO
: To view parameters of current channel.
EXIT
: To return to previous status or menu. To
exit from the menu.
RECORD
(
) : To start recording on external
Hard Disk Drive.
STOP
(
) : To stop playback/to stop
recording.
PLAY
(
) : To play the recorded program.
PAUSE
(
) : To pause the playback.
REWIND
(
) : To rewind a recorded program
in normal or fast speed (x1, x2, x5, x20, x50,
x300 times).
FAST-FORWARD
(
) : To fast forward a
recorded program in normal or fast speed
(x2, x5, x20, x50, x300 times).
SKIP
(
/
) : To jump forward or backward
in recorded program.
BOOKMARK
: To set a bookmark position
(viewing point) on a recorded programs.
REPEAT
: To playback specific part
repeatedly.
P.LIST
: To show list of recorded programs.
JUMP
: To jump to the next bookmark when
during playback.)
T-SHIFT
: To start/stop time shift function.
SUBTITLE
: To enable or disable subtitles.
ZOOM
: To enlarge or zoom into the screen.
F1
: This key is unavailable.(Reserved key)
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
VOL
VOL
CH
CH
20
28
20
22
24
21
23
27
30
34
25
29
31
32
35
36
26
33
38
37
