Operation
25
Operation
24
Operation
Operation
7.2
Setup
5) SCART OUT
You can change the Scart video output mode. Press
/
buttons to select between
options below and press
.
6) FRAME RATE
You can change the video type. Press
/
buttons to select and Press
ҫ
Note : If the satellite signal and your TV type are mismatched, the TV picture may be
distorted. Even in this case, MENU will be displayed as normal. (e.g. When you
receive PAL satellite signal with NTSC TV type setting or vice versa)
CH
CH
CH
CH
CVBS
Video out signal from TV, AUX scart will be composite.
Y/C
Video out signal from TV, AUX scart will be Y, C.
Auto
When your TV is compatible with NTSC/PAL dual mode.
PAL
When your TV is only for PAL reception. Regardless of the satellite signal, it
will display in PAL format. The resolution can change 1080i / 720p / 576P/576i
NTSC
When your TV is only for NTSC reception. Regardless of the satellite signal, it will
display in NTSC format. The resolution can change 1080i / 720p / 480p/480i
7.2
Setup
2. AUDIO
MENU >SETUP>AUDIO
1) DIGITAL AUDIO
You can enable Dolby Digital Audio. Press
/
buttons to select and press
button.
2) MODE
You can set up Analog Audio. Press
/
buttons to select and press
button.
CH
CH
CH
CH
DOLBY DIGITAL
Dolby digital (AC-3) output enable
PCM
Dolby digital (AC-3) output disable
AUDIO LEFT
Analog audio output is only mono left
AUDIO RIGHT
Analog audio output is only mono right
STEREO
Analog audio output is only stereo mode
