![background image](http://html.mh-extra.com/html/hyundai/ah-3110/ah-3110_manual_2197228019.webp)
Operation
37
Operation
36
Operation
Operation
7.2
Setup
2) FACTORY DEFAULT
MENU > SETUP > SYSTEM > FACTORY DEFAULT
You can reset all settings of the receiver to the factory settings.
Press
button. You need to enter the password. The default password is
“0000.”
After you type in the password correctly, all settings of the receiver will return to initial
settings.
You will see installation wizard after factory default. Since you cannot restore the previous
settings, be careful when you are setting it back to factory default.
3) UPGRADE
MENU > SETUP > SYSTEM > UPGRADE > USB
You can upgrade System Firmware by USB.
a. First, you have to copy the new firmware in a USB memory stick.
b. Insert the USB memory to front panel USB port.
c. A pop up will appear showing the new F/W version.
d. Press OK button. You will need to enter the password to confirm.
e. Upgrade will start soon after you enter the password.
f. After finishing the upgrade, receiver will be restarted.
ҫ
Note : 1. Updated firmware is available website below.
UltraPower Technology website (http://ultrapower.co.nz) or HDT website
(http://www.hdt.co.kr)
2. Download AH-3110 firmware in your USB memory.
7.2
Setup
4) EXPORT/IMPORT CH LIST
MENU > SETUP > SYSTEM > EXPORT/IMPORT CH LIST
͈
EXPORT CHANNEL LIST
Export the channel list to USB memory.
a. Insert USB memory to front panel USB port.
b. Select “EXPORT CHANNEL LIST,” and pop up message will appear.
c. Press
button to start the export of all channel list. (File name : ah-3100_ch.txt)
d. You can edit the channel list file using your PC. (delete, change channel order, etc..)
͉
IMPORT CHANNEL LIST
Import the channel list from USB memory.
a. First, copy the new channel list in USB memory
b. Insert USB memory to front panel USB port.
c. Select “IMPORT CHANNEL LIST,” and pop up message will appear.
d. Enter the password to start the channel list import.
e. After finishing the channel list import, receiver will be restarted.
5) FIRMWARE VERSION
MENU > SETUP > SYSTEM > FIRMWARE VERSION
You can check the current F/W version.
Caution
Never turn the power off during the system upgrade. It brings about system fault.
If there is unexpected power off during upgrade. You will see “check USB” message
front display. The system will automatically be restored if you connect USB memory
stick where Updated F/W is.