Operation
29
Operation
28
Operation
Operation
7.2
Setup
- LNB Type
: Switch LNB Type with /
buttons.
- High L.O. / Low L.O.
: Switch LNB oscillator frequency with /
buttons.
- LNB Power
: Switch LNB power with /
buttons.
- 0/22KHz
: Set the path of 0/22KHz switch box with /
buttons.
ҫ
Note : When you set the LNB type to “Universal” mode, “0/22KHz” will be set to “Auto”
function automatically and can’t be revised.
- DiSEqC 1.0
: Select the DiSEqC box settings with /
buttons. You can choose the
following options:
NONE: without DiSEqC
1/2, 2/2: two ports DiSEqC
1/4, 2/4, 3/4, 4/4: 4 ports DiSEqC
1/8, 2/8... 8/8: 8 ports DiSEqC
1/16, 2/16... 16/16: 16 ports DiSEqC
- DiSEqC 1.1
: Select the DiSEqC box settings with /
buttons. You can choose the
following options:
NONE: without DiSEqC
PORT #1... PORT #16 : 16 ports DiSEqC
ҫ
Notes : When you change each option, you need to know the exact frequency of LNB to
modify L.O. (local oscillator).
ҫ
Notes :
When you change settings for 22KHz and DiSEqC, you need to understand the
environment of connecting the receiver and antenna.
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
7.2
Setup
a. Scan (Press BLUE from LNB window)
You can get all channels in the pre-programmed TPs. This function can also be used to get
the latest channel data while receiver is in use. Through this function, the receiver searches
for all available channels and saves them.
- Scan Mode
: Press /
buttons to switch
Free
or
Free+Scrambled
channels.
a. Free : Searches only
Free Channels
.
b. Free+Scrambled : Searches
All Channels
.
- Scan Channel
: Press /
buttons to either search for
TV only/Radio only/TV+Radio
.
- Network Search
: You can search for channels with network information table.
When you are finished, press
button to start the channel search.
͉
New SAT(Press RED)
You can add a new satellite. You have to set up for the new satellite.
͊
Rename(Press GREEN)
You can change the name of the selected satellite according to your preference
through this option. When you Press Yellow, virtual keyboard will pop up. Use
/
/
and
to type in new name.
͋
Delete(Press BLUE)
You can delete a satellite by pressing Green button. There will be a warning message to
confirm. If you type in the password correctly, selected satellite will be deleted.
VOL
VOL
CH
CH
VOL
VOL
VOL
VOL
