Operation
21
Operation
20
Operation
Operation
ҫ
Note : 1. Insert the CAM fully into the slot so that the arrow marked on the CAM faces
upwards and inwards.
2. Insert the smart card fully into the CAM so that the microchip (gold color) faces
upwards and inwards.
2) INSERT CA Module(s) and Smartcard(s)
To receive pay-TV channels, you need a CA Module and a Smart card of your preference
from the service provider (program distributor). If you receive services from more than one
service provider, you need to change to a different smart card or even a different CA
Module.
Since smart card is connected to a single service provider, limited channels will be
available. Without a CA Module and a smart card, you can only watch
‘Free-to-Air’
programs.
ҫ
PIN-Code
These cards are loaded with a 4-digit code, or PIN code (Personal Identification Number).
Normally PIN code is set to
‘0000’
or
‘1234’
. PIN code is necessary for the additional
service offered by the service provider.
7.1
Service
8. CI MODULE
You can check the status of CAM and smart card inserted in their slots.
If you want detailed information of the selected
CAM
, select slot number 1 or slot number
2 with
or
and press
button. Proceed with further instructions displayed on the
screen, depending on the
CAMs
in use.
1) RECEIVING SCRAMBLE CHANNEL
With a
DVB COMMON INTERFACE
compatible
CAM (Conditional Access Module)
and a
Smart card, you can receive relevant scrambled channels and/or encrypted channels.
͈
Insert a
CAM
into one of the slots of your receiver.(You can insert two
CAMs
at the same
time)
͉
The message,
‘PLUGGED CAM’
, will appear on the screen.
͊
After the message,
‘PLUGGED CAM’
, has disappeared, you can select the channel you
want.
CH
CH
7.1
Service
