Hyundai accent 2002 Owner'S Manual Download Page 120 | Manualshive

Page: 120 / 143

background image

DO-IT-YOURSELF MAINTENANCE

6-13

AX10920F

1.18 in. (30 mm)

G150A01A-AAT

CHECKING STEERING WHEEL
FREEPLAY

To check the steering wheel freeplay, stop the
car with the wheels pointed straight ahead and
gently move the steering wheel back and forth.
Use very light finger pressure and be sensitive
to changes in resistance that mark the limits of
the freeplay. If the freeplay is greater than
specified, have it inspected by your Hyundai
dealer and adjusted or repaired if necessary.

SSA6160A

0.24 ~ 0.51 in.
(6 ~ 13 mm)

SSA6170A

0.12 ~ 0.31 in.
(3 ~ 8 mm)

G160A01A-AAT

CHECKING CLUTCH PEDAL
FREE-PLAY

With the engine off, press lightly on the clutch
pedal until you feel a change in resistance. This
is the clutch pedal free-play. The free-play should
be within the limits specified in the illustration
below. If it is not, have it inspected by your
Hyundai dealer and adjusted or repaired if nec-
essary.

G170A01A-AAT

CHECKING BRAKE PEDAL
FREE-PLAY

With the engine off, press down on the brake
pedal several times to reduce the vacuum in the
brake booster.
Then, using your hand, press down slowly on
the brake pedal until you feel a change in
resistance. This is the brake pedal freeplay.
The freeplay should be within the limits speci-
fied in the illustration above. If it is not, have it
inspected by your Hyundai dealer and adjusted
or repaired if necessary.

«
...
118
119
120
121
122
...
»

Summary of Contents for accent 2002
















































































































































Reviews:

No comments

Related manuals for accent 2002

AAB-P-RZR900-K2-001

Brand: SuperATV Pages: 3

Brand: Trailboss Pages: 8

Brand: Condor Pages: 2

Brand: Hyundai Pages: 280

Brand: Hyundai Pages: 19

Brand: v.link Pages: 21

Brand: Draw tite Pages: 4

Brand: EFILive Pages: 25

TX-STAMP-4-FC04

Brand: Over Armour Offroad Pages: 9

2003 Silhouette

Brand: Oldsmobile Pages: 466

OPTIA hybrid 2020

Brand: Kia Pages: 54

Brand: S&B Filters Pages: 4

Brand: Mazda Pages: 3

Brand: Mercedes-Benz Pages: 493

Nova Electronics Hide-a-Led DEUCE DUAL HEAD W600

Brand: Ecco Pages: 2

Brand: Feniex Pages: 4

Brand: Or-Fab Pages: 3

Brand: Weather Guard Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands