manualshive.com logo in svg

Hyundai accent 2002, Owner'S Manual

Share
Download
Hyundai accent 2002 Owner'S Manual Download Page 29

FEATURES OF YOUR HYUNDAI

1- 20

FUA1111B

B240B02A-AAT

SRS Components and Functions

The SRS consists of the following components:

- Driver's Airbag Module
- Passenger's Airbag Module
- Knee Bolster
- SRS Service Reminder Indicator (SRI)
- SRS Control Module (SRSCM)

The SRSCM continually monitors all elements
while the ignition is "ON" to determine if a
frontal or near-frontal impact is severe enough
to require airbag deployment.

o Do not tamper with or disconnect SRS

wiring, or other components of the SRS
system. Doing  so could result in injury,
due to accidental firing of the airbags or
by rendering the SRS inoperative.

o Do not install a child restraint system in

the  front passenger seat position. A  child
restraint system must never be placed in
the front seat. The infant or child could be
severely injured or killed by  an airbag
deployment in case of an accident.

o Do not allow children to ride in the front

passenger seat. If older children (teenag-
ers and older) must ride in the front seat,
make sure they are always properly belted
and that the seat is moved back as far as
possible.

o For maximum safety protection in all

types of crashes, all occupants including
the driver should always wear their seat
belts whether or not an airbag is also
provided at their seating position to mini-
mize the risk of severe injury or death in
the event of a crash. Do not sit or lean
unnecessarily close to the airbag while
the vehicle is in motion.

o The SRS airbag system must deploy very

rapidly to provide protection in a crash. If
an occupant is out of position because of
not wearing a seat belt, the airbag may
forcefully contact the occupant causing
serious or fatal injuries.

Side impact

Rollover

o Front airbags are not intended to deploy

in side-impact, rear-impact or rollover
crashes. In addition, airbags will not de-
ploy in frontal crashes below the deploy-
ment threshold speed.

o The driver should sit back as far as pos-

sible while still maintaining control of the
vehicle. If you are sitting too close to the
airbag, it can cause death or serious
injury when it inflates.

o No objects should be placed over or near

the airbag modules on the steering  wheel,
instrument panel, and the  front
passenger's  panel above  the  glove
box, because any  such object could
cause harm if the vehicle is in a crash
severe enough to cause the airbags to
deploy.

o If the airbags deploy, they must be re-

placed by an authorized Hyundai dealer.

Rear impact

B240A01A

Summary of Contents for accent 2002
















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands