manualshive.com logo in svg

Hyundai accent 2002, Owner'S Manual

Share
Download
Hyundai accent 2002 Owner'S Manual Download Page 115

DO-IT-YOURSELF MAINTENANCE

6-8

G070A02Y-AAT

CHANGING THE AIR CLEANER FIL-
TER

G080A02A-AAT

WINDSHIELD WIPER BLADES

AX60160A

The wiper blades should be carefully inspected
from time to time and cleaned to remove accu-
mulations of road film or other debris. To clean
the wiper blades and arms, use a clean sponge
or cloth with a mild soap or detergent and water.
If the wipers continue to streak or smear the
glass, replace them with genuine Hyundai re-
placement parts or their equivalent.

CAUTION:

o Do not operate the wipers on dry glass.

This can result in more rapid wear of the
wiper blades and may scratch the glass.

o Keep the blade rubber out of contact

with petroleum products such as engine
oil, gasoline, etc.

AX60140A

The replacement of air cleaner filter is per-
formed in the following manner.

1. Unsnap the Clips around the cover.
2. When this is done, the cover can be lifted

off, the old filter removed and the new filter
put in its place.

Genuine Hyundai replacement parts are rec-
ommended.

CAUTION:

Operating your vehicle without a proper air
filter in place can result in excessive engine
wear.

4. When preparing to remove the old spark

plug, guide the socket down over the spark
plug, being careful not to damage the ce-
ramic insulator.

5. To remove the old spark plug, turn the

wrench handle in a counterclockwise direc-
tion.

6. To install the new spark plug, guide the

socket down over the spark plug, being
careful not to damage the ceramic insulator.

DP60130A

NOTE:

Spark plugs should be tightened firmly. Over-
tightening can damage the threads in the
aluminum cylinder head. Also, leaving them
too loose can cause the spark plugs to get
very hot and possibly result in damage to
the engine.

7. Replace the cable by pushing the insulated

connector directly down onto the electrode.
Check to be sure it has snapped into place
and  can't fall off.

Summary of Contents for accent 2002
















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands