manualshive.com logo in svg

Hyundai accent 2002, Owner'S Manual

Share
Download
Hyundai accent 2002 Owner'S Manual Download Page 128

EMISSION CONTROL SYSTEMS

  7-1

7. EMISSION CON-

TROL SYSTEMS

H010B01A-AAT

1. CRANKCASE EMISSION CONTROL

SYSTEM

The positive crankcase ventilation system is
employed to prevent air pollution caused by
blow-by gases being emitted from the crank-
case. This system supplies filtered fresh air to
the crankcase through the air intake hose.

H010C01S-AAT

2. Evaporative Emission Control (In-

cluding ORVR: Onboard Refueling
Vapor Recovery) System

The Evaporative Emission Control System is
designed to prevent fuel vapors from escaping
into the atmosphere.

(The ORVR system is designed to allow the
vapors from the fuel tank to be loaded into
a canister while refueling at the gas station,
preventing the escape of fuel vapors into
the atmosphere.)

Canister

Fuel vapors generated inside the fuel tank are
absorbed and stored in the onboard canister.
When the engine is running, the fuel vapors
absorbed in the canister are drawn into the
induction system through the purge control so-
lenoid valve.

Purge Control Solenoid Valve (PCSV)

The purge control solenoid valve is controlled
by the Engine Control Module (ECM); when the
engine coolant temperature is low during idling,
the PCSV closes so that evaporated fuel is not
taken into the engine. After the engine warms-
up during ordinary driving, the PCSV opens to
introduce evaporated fuel to the engine.

H010D01A-AAT

3. EXHAUST EMISSION

CONTROL SYSTEM

The Exhaust Emission Control System is a
highly effective system which controls exhaust
emissions while maintaining good vehicle
performace.

H010A01A-AAT

EMISSION CONTROL SYSTEM

Your Hyundai is equipped with an emission
control system to meet all requirements of the
U.S. Environmental Protection Agency or Cali-
fornia Air Resources Board.
There are three emission control systems which
are as follows.

1) Crankcase Emission Control System
2) Evaporative Emission Control System
3) Exhaust Emission Control System

In order to ensure the proper function of the
emission control systems, it is recommended
that you have your car inspected and main-
tained by an authorized Hyundai dealer in ac-
cordance with the maintenance schedule in this
manual.

Inside the crankcase, the fresh air mixes with
blow-by gases, then passes through the PCV
valve into the induction system.

H020A01A-AAT

CATALYTIC CONVERTER

All Hyundai vehicles are equipped with a mono-
lith type three-way catalytic converter  to re-
duce the carbon monoxide, hydrocarbons and
nitrogen oxides contained in the exhaust gas.
Exhaust gases passing through the catalytic
converter cause it to operate at a very high
temperature. The introduction of large amounts
of unburned gasoline into the exhaust may
cause the catalytic converter to overheat and
create a fire hazard. This risk may be reduced
by observing the following:

ZN70010A

Catalytic Converter

7

Summary of Contents for accent 2002
















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands