FEATURES OF YOUR HYUNDAI
1- 15
B230C02A-AAT
Installing a Child Restraint Seat with
the "Tether Anchorage" System
(4 Door)
Rear seat package tray
YR10380B
Anchorages
Three child restraint hook holders are located
on the rear seat package tray. To install the
child restraint seat, connect the child restraint
tether strap hook to the child restraint hook
holder and tighten to secure the seat.
Front of Vehicle
B230E02A-AAT
Installing a Child Restraint Seat with
the "Tether Anchorage" System
(3 Door)
Three child restraint hook holders are located
on the vertical back panel.
To install the child restraint seat, remove the
blanking covers on the covering shelf.
B230B01E-GAT
Using a Child Restraint System
For small children and babies, the use of a child
seat or infant seat is strongly recommended
and may be required in your state. This child
seat or infant seat should be of appropriate size
for the child and should be installed in accor-
dance with the manufacturer's instructions. It is
further recommended that the seat be placed in
the vehicle's rear seat since this can make an
important contribution to safety.
Your vehicle is provided with three child re-
straint hook holders for installing the child seat
or infant seat.
SSA1100B
Bolt, Holder (8mm - 30 mm)
Washer, Conical Spring
Holder, Child Restraint Hook
Retainer Washer
Cover, Child Restraint
Hook Holder
B230E02A
Tether strap hook
Blanking covers
Covering shelf
Tether strap hook
Back panel
Front of Vehicle
Spacer(10 mm), Child
Restraint Hook Holder
