manualshive.com logo in svg

Hyundai accent 2002, Owner'S Manual

Share
Download
Hyundai accent 2002 Owner'S Manual Download Page 16

FEATURES OF YOUR HYUNDAI

1- 7

B080F01S-AAT

Seat Cushion Height Adjustment
(Driver's Seat Only) (If Installed)

To raise or lower the front part of the seat
cushion, turn the front knob forward or rear-
ward. To raise or lower the rear part of the seat
cushion, turn the rear knob forward or rearward.

AX10150A

B130A01A-AAT

REAR SEAT ENTRY (For 3-door model)

ZL10160A

1

2

The front passenger seatback should be tilted
to enter the rear seat.
By pulling up on the recliner control lever (1) at
the outside of the front passenger seat, the
seatback will tilt forward and the seat will auto-
matically slide forward.
Rear seat occupants can tilt the front passen-
ger seatback by depressing the foot lever (2) as
shown in the illustration.

WARNING:

Passengers sitting in the rear seat should
be careful not to accidentally press the foot
lever (2) while the vehicle is moving, as this
may cause the seatback to move forward
and injure a front seat occupant.

B140A01S-AAT

REAR SEAT WARNING

AX10090A

For the safety of all passengers, luggage or
other cargo should not be piled higher than the
top of the seatback. In addition, do not place
objects on the rear shelf as they may move
forward during braking or in an accident and
strike vehicle passengers.

Summary of Contents for accent 2002
















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands