background image

Features of your vehicle

16

4

D050100ABH-EU

Operating door locks from out-
side the vehicle 

• Turn the key toward the rear of the

vehicle to unlock and toward the front
of the vehicle to lock.

• If you lock the door with a key, all vehi-

cle doors will lock automatically.

• From the driver’s door, turn the key to

the right once to unlock the driver’s
door and once more within 4 seconds
to unlock all doors.
If your vehicle is equipped with a smart
key, you can change the system to
unlock all doors by turning the key to
the right once. If you want this feature
(central door unlock mode), refer to the
"Smart key or Remote keyless entry" in
this section.

• Doors can also be locked and

unlocked with the transmitter (or smart
key).

• Once the doors are unlocked, they may

be opened by pulling the door handle.

• When closing the door, push the door

by hand. Make sure that doors are
closed securely.

NOTICE

• In cold and wet climates, door locks

and door mechanisms may not work
properly due to freezing conditions.

• If the door is locked/unlocked multi-

ple times in rapid succession with
either the vehicle key or door lock
switch, the system may stop operating
temporarily in order to protect the
circuit and prevent damage to system
components. 

• To lock a door without the key, push the

inside door lock button (1) or central
door lock switch (2) to the “Lock” posi-
tion and close the door (3).

• If you lock the door with the central

door lock switch (2), all vehicle doors
will lock automatically.

NOTICE

Always remove the ignition key, engage
the parking brake, close all windows
and lock all doors when leaving your
vehicle unattended.  

DOOR LOCKS 

OBH048006

Lock

Unlock

OBH048007N

Summary of Contents for 2011 Genesis


























































































































































































































































































































































































































Reviews: