background image

INSTALLATION MANUAL

ACURA - TL - 2004-2007

Mount Location:

 To the right of the radio

FOR

MVM

Multi Vehicle Mount

MVM-35-05

Thank you for purchasing your new Bracketron 

MVM 

Multi Vehicle Mount.

The  Multi Vehicle Mount is an (end user-installer) modifi able professional mounting 

bracket for most all mobile electronics requiring a steady and secure installation in a mo-

tor vehicle. The MVM installs behind your vehicles dash panel using existing or non-vis-

ible holes and is designed to cleanly protrude out from your vehicle’s dash panel.

Before installing, you must take the time to read and understand this installation manual 

and read all the warnings accompanying this product.

Instructions Include: 

 tools needed for install, directions for dash panel removal, directions 

for modifying the MVM if required.

You can download this manual and any updates from

http://www.bracketron.com/downloads

Includes PHS-203 Ultra Slim Swivel

Summary of Contents for Multi Vehicle Mount MVM-35-05

Page 1: ... mo tor vehicle The MVM installs behind your vehicles dash panel using existing or non vis ible holes and is designed to cleanly protrude out from your vehicle s dash panel Before installing you must take the time to read and understand this installation manual and read all the warnings accompanying this product Instructions Include tools needed for install directions for dash panel removal direct...

Page 2: ...SASSEMBLY INSTRUCTION Begin installation by removing the long trim on the right side of the radio center console Insert a Dash Trim tool part SIT 104 in the location as shown in the picture to the left Work your way along this trim releasing all the clips Note Some of the clips are tight Use caution Set the trim aside in a safe place Ship to Step 5 on the following page if you have not yet formed ...

Page 3: ...e front page of this manual Many vehicle applications may not require any modifications to the mount If this is the case it will be noted below and there will be no steps to follow on this page PLEASE NOTE Bracketron Inc 2007 All rights reserved The information in this document is subject to change without notice Bracketron Inc assumes no responsibility for any errors that may appear in this docume...

Page 4: ...se over time you can grasp the swivel and pull toward you lightly while rotating it clockwise This will tighten the swivel allowing you to create the desired tension needed Picture 3 Attach the AMPs T Notch Adapter to the front half of the swivel using the M4x12 Pan Head screws Attach the M4 Star Washers and M4 Hex Nuts to the screws and tighten the plate down with the 2 screwdriver and 9 32 open ...

Reviews: