manualshive.com logo in svg

Hyundai 2011 Genesis, Owner'S Manual

Share
Download
Hyundai 2011 Genesis Owner'S Manual Download Page 269

5 37

Driving your vehicle

E090300ABH-EU

To decrease the cruising speed:

Follow either of these procedures:
• Push the SET- switch and hold it. Your

vehicle will gradually slow down.
Release the switch at the speed you
want to maintain.

• Push the SET- switch and release it

immediately. The cruising speed will
decrease 1.0 mph (1.6 km/h) each
time the SET- switch is operated in this
manner.

E090400ABH

To temporarily accelerate with the
cruise control on:

If you want to speed up temporarily when
the cruise control is on, depress the
accelerator pedal. Increased speed will
not interfere with cruise control operation
or change the set speed.
To return to the set speed, take your foot
off the accelerator.
If you press the SET- switch at increased
speed, the cruising speed will be set
again.

E090500ABH

To cancel cruise control, do one
of the following:

• Press the brake pedal.
• Shift the shift lever into N (Neutral)
• Press the CANCEL switch located on

the steering wheel.

• Decrease the vehicle speed lower than

the memory speed by 9 mph (15
km/h).

• Decrease the vehicle speed to less

than approximately 20 mph (32 km/h).

• Increase the vehicle speed to more

than approximately 125 mph (200
km/h).

OBH058023

OBH058021

Summary of Contents for 2011 Genesis


























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands