manualshive.com logo in svg

Hyundai 2011 Genesis, Owner'S Manual

Share
Download
Hyundai 2011 Genesis Owner'S Manual Download Page 253

5 21

Driving your vehicle

Electronic parking brake (EPB) 
(if equipped)

E070203BBH

Applying the parking brake

To apply the parking brake, first apply the
brake pedal and press the EPB switch.
Make sure that the brake warning light
comes on.
When parking the vehicle on an incline,
the shift lever must be in the P (Park)
position.

E070704BBH

Releasing the parking brake

To release the parking brake manually
with the ignition switch ON, pull the EPB
switch while applying the foot brake.
Make sure that the brake warning light
goes off.
The parking brake will be released auto-
matically when you shift the transmission
from P (Park) to R (Reverse), N (Neutral)
or D (Drive) while pressing the foot brake
pedal.
Make sure that the brake warning light
goes off.
If the parking brake does not release or
does not release all the way, have the
system checked by an authorized
HYUNDAI dealer.

✽

✽

NOTICE

• For your safety, you can apply the

EPB even though the ignition switch is
in the OFF position, but you cannot
release it. 

• For your safety, press the foot brake

and release the parking brake manu-
ally with EPB switch when you drive
downhill or back up the vehicle.

OBH059010

OBH059019

Summary of Contents for 2011 Genesis


























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands