manualshive.com logo in svg

Hyundai 2011 Genesis, Owner'S Manual

Share
Download
Hyundai 2011 Genesis Owner'S Manual Download Page 224

4 147

Features of your vehicle

BLUETOOTH

®

PHONE OPERATION

(IF EQUIPPED)

■

What is Bluetooth

®

?

Bluetooth

®

is a wireless technology that

allows multiple short range, low-powered
devices like hands-free, stereo headset,
wireless remote control, etc. to be connect-
ed. For more information, visit the
Bluetooth

®

website at 

www.Bluetooth.com

■ 

General Feature

• This audio system supports Bluetooth

®

hands-free and stereo-headset features.

- HANDS-FREE feature: Making or

receiving calls wirelessly through
voice recognition.

- STEREO-HEADSET  feature: Playing

music from cellular phones (that sup-
ports A2DP feature) wirelessly.

• 

Voice recognition engine of the

Bluetooth

®

system supports 3 types of

languages:
- English
- Canadian French
- US Spanish

✽

✽

NOTICE

• The phone must be paired to the sys-

tem before using Bluetooth® features.

• Only one selected(linked) cellular

phone can be used with the system at
a time.

• Some phones are not fully compatible

with this system.

■

Bluetooth

®

Language Setting

The system language can be changed by
the following steps:
1. Power on the audio system with the

volume set to an audible level.

2. Press and hold 

button on the

steering wheel until the audio displays
“Please Wait”.

- The  Bluetooth

®

system will reply in

currently selected language that it is
changing to the next language.

- System language cycles between

English, Canadian French and US
Spanish.

3. When completed, the audio display

returns to normal.

4. Repeat steps 2 and 3 for the next lan-

guage selection.

✽

✽

NOTICE

The phone needs to be paired again
after changing system language.
• Avoid resting your thumb or finger on

the 

as the language could unin-

tentionally change.

Summary of Contents for 2011 Genesis


























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands