Hyundai 2011 Genesis Owner'S Manual Download

Page: 299 / 409

5 67

Driving your vehicle

WARNING

• Overloading your vehicle can

cause heat buildup in your
vehicle's tires and possible
tire failure that could lead to a
crash.

• Overloading your vehicle can

cause increased stopping dis-
tances that could lead to a
crash.

• A crash resulting from poor

handling, vehicle damage, tire
failure, or increased stopping
distances could result in seri-
ous injury or death.

WARNING

- Loose cargo

Items you carry inside your
vehicle can strike and injure
occupants in a sudden stop or
turn, or in a crash.
• Put items in the cargo area of

your vehicle. Try to spread the
weight evenly.

• Never stack items, like suit-

cases,

inside the vehicle

above the tops of the seats.

• Do not leave an unsecured

child restraint in your vehicle.

• When you carry something

inside the vehicle, secure it.

CAUTION

• Overloading your vehicle may

cause damage. Repairs would
not be covered by your warran-
ty. Do not overload your vehicle.

• Using heavier suspension com-

ponents to get added durability
might not change your weight
ratings. Ask your dealer to help
you load your vehicle the right
way.

Summary of Contents for 2011 Genesis


























































































































































































































































































































































































































Search results

Summary of Contents for 2011 Genesis

Reviews:

Related manuals for 2011 Genesis

Brands by name

Popular brands

Hyundai 2011 Genesis, Owner'S Manual

Search results

Summary of Contents for 2011 Genesis

Reviews:

Related manuals for 2011 Genesis

Brands by name

Popular brands