manualshive.com logo in svg

Hyundai 2011 Genesis, Owner'S Manual

Share
Download
Hyundai 2011 Genesis Owner'S Manual Download Page 267

5 35

Driving your vehicle

➀

CRUISE indicator

➁

SET indicator

E090000ABH-EU

The cruise control system allows you to
program the vehicle to maintain a con-
stant speed without pressing the acceler-
ator pedal.
This system is designed to function
above approximately 25 mph (40 km/h)
and below approximately 113 mph (180
km/h).

✽

✽

NOTICE

During normal cruise control operation,
when the SET switch is activated or
reactivated after applying the brakes,
the cruise control will energize after
approximately 3 seconds. This delay is
normal.

CRUISE CONTROL SYSTEM

WARNING

• If the cruise control is left on,

(CRUISE indicator light in the
instrument cluster illuminated)
the cruise control can be activat-
ed unintentionally.

Keep the

cruise control system off
(CRUISE indicator light OFF)
when the cruise control is not in
use, to avoid inadvertently set-
ting a speed.

• Use the cruise control system

only when traveling on open
highways in good weather.

• Do not use the cruise control

when it may not be safe to keep
the car at a constant speed, for
instance, driving in heavy or
varying traffic, or on slippery
(rainy, icy or snow-covered) or
winding roads or over 6% up-hill
or down-hill roads.

• Pay particular attention to the

driving conditions whenever
using the cruise control system.

• Be careful when driving downhill

using the cruise control system,
which may increase the vehicle
speed.

OBH058050

Summary of Contents for 2011 Genesis


























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands