manualshive.com logo in svg

Hyundai 2007 Sonata, Owner'S Manual

The Hyundai 2007 Sonata Owner's Manual is a comprehensive guide that provides detailed instructions and information about the features, maintenance, and operation of the vehicle. This essential manual is available for free download on our website, ensuring easy access to this valuable resource anytime, anywhere.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

96

!

WARNING:

o Keep the cruise control ON/OFF switch

off when not using the cruise control to
avoid inadvertently setting a speed.

o Use the cruise control system only when

traveling on open highways in good
weather.

o Do not use the cruise control when it

may not be safe to keep the car at a
constant speed, for instance, driving in
heavy or varying traffic, or on slippery
(rainy, icy or snow-covered) or winding
roads or over 6% up-hill or down-hill
roads.

o Pay particular attention to the driving

conditions whenever using the cruise
control system.

o During cruise-speed driving of a manual

transaxle vehicle, do not shift into neu-
tral without depressing the clutch pedal,
since the engine will be overrevved. If
this happens, depress the clutch pedal
or release the cruise control ON/OFF
switch.

o During normal cruise control operation,

when the "SET" switch is activated or
reactivated after applying the brakes,
the cruise control will energize after ap-
proximately 3 seconds. This delay is
normal.

B660F01NF-AAT

To Reset at a Slower Speed

1. Push the control switch "SET (COAST)" and

hold it. While the control switch is pushed, the
vehicle speed will gradually decrease.
If the "SET(COAST)" switch is selected, the
cruise "SET" indicator light in the instrument
cluster will illuminate.

2. When the desired speed is obtained, release

the control switch.

B660B02NF

B660E01NF-GAT

To Reset at a Faster Speed

1. Push the control switch "RESUME (ACCEL)"

and hold it.
If the control switch "RESUME(ACCEL)" is
selected, the cruise "SET" indicator in the
instrument cluster will illuminate.

2. Accelerate to desired speed and release the

control switch. While the control switch is
held, the vehicle will gradually gain speed.

If the control switch "RESUME(ACCEL)" is
selected, the cruise "SET" indicator in the in-
strument cluster will illuminate.

Summary of Contents for 2007 Sonata




























































































































































































































































































Reviews:

No comments

Related manuals for 2007 Sonata

hager witty park XEV6 Series Installation Manual preview
witty park XEV6 Series
Brand: hager Pages: 9
Kargo Master 40131 Installation Manual preview
40131
Brand: Kargo Master Pages: 5
RAM 2500 2020 Quick Reference Manual preview
2500 2020
Brand: RAM Pages: 20
Yakima Q46 Installation Instructions preview
Q46
Brand: Yakima Pages: 4
GARO ENTITY PRO Installation preview
ENTITY PRO
Brand: GARO Pages: 2
Trailboss QTHD519L Fitting Instructions Manual preview
QTHD519L
Brand: Trailboss Pages: 8
TUFLOC Dodge Charger TufBox Installation Instructions Manual preview
Dodge Charger TufBox
Brand: TUFLOC Pages: 6
GReddy Intercooler Kit Type 31 Installation Manual preview
Intercooler Kit Type 31
Brand: GReddy Pages: 9
Havis-Shields 1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28 Install Instructions preview
1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28
Brand: Havis-Shields Pages: 3
Pontiac 2004 Vibe Navigation System Owner'S Manual preview
2004 Vibe Navigation System
Brand: Pontiac Pages: 44
FALCON RIDGE HO-P500-FC04 Instructions For Installation And Care preview
HO-P500-FC04
Brand: FALCON RIDGE Pages: 8
Scosche 142HUD2 Manual preview
142HUD2
Brand: Scosche Pages: 8
Fast Master Products SWIVELWHEEL-46 Assembly Instructions Manual preview
SWIVELWHEEL-46
Brand: Fast Master Products Pages: 13
E&G Classics Black Ice Mesh Instruction Manual preview
Black Ice Mesh
Brand: E&G Classics Pages: 4
Safe Fleet PRIME DESIGN HRR3-E-PM52 Manual preview
PRIME DESIGN HRR3-E-PM52
Brand: Safe Fleet Pages: 12
Mopar 2005-2009 Chrysler 300C Installation Instructions Manual preview
2005-2009 Chrysler 300C
Brand: Mopar Pages: 7
Scosche HAQ02 Quick Start Manual preview
HAQ02
Brand: Scosche Pages: 8
Buick Automobille 2004 Century Getting To Know Manual preview
Automobille 2004 Century
Brand: Buick Pages: 12

Brands by name

Popular brands

Load more brands