manualshive.com logo in svg

Hyundai 2007 Sonata, Owner'S Manual, Page: 106 / 283

Share
Download
Hyundai 2007 Sonata Owner'S Manual Download Page 106

1

FEATURES OF YOUR HYUNDAI

92

B600B01NF-GAT

Tilt and telescopic type
(If Installed)

To adjust the steering wheel:

1. Push the lever downward fully to unlock.
2. Adjust upward or downward and forward or

backward to set the steering wheel to the
desired position.

3. After adjustment, securely tighten the lever

by pulling it upward.

B600B01NF-A

B580C01JM-AAT

Sun Visor Extender

Your vehicle is equipped with sun visor extend-
ers that may be used when the visor is in the side
glass position.

B580C01NF

STEERING WHEEL

B600A01NF-GAT

Tilt type

To adjust the steering wheel:

1. Pull the lever toward you and hold it to unlock.
2. Raise or lower the steering wheel to the

desired position.

3. After adjustment, release the lever.

HNF2067

Summary of Contents for 2007 Sonata




























































































































































































































































































Reviews:

No comments