Hyundai 2007 Sonata Owner'S Manual Download Page 230

Page: 230 / 283

DO-IT-YOURSELF MAINTENANCE

3. Lower the glove box down completely by

pushing both sides of the glove box inward.

HNF2163

CHANGING THE CLIMATE CON-
TROL AIR FILTER

B145A01NF-AAT

(For Evaporator and Blower Unit)
(If Installed)

The climate control air filter is located in the right
side of the instrument panel.
It helps to decrease the amount of pollutants
entering the car.

1. Remove the cover (1) which is located to the

right side of the instrument panel by pulling
it.

2. Pull the glove box cylinder (2) to unlock the

glove box retainer.

HNF2163-1

4. Remove the climate control air filter cover by

pressing both side clips.

HNF2164

CAUTION:

Be careful not to damage filter fixing clips.

Summary of Contents for 2007 Sonata




























































































































































































































































































Search results

Summary of Contents for 2007 Sonata

Reviews:

Related manuals for 2007 Sonata

Brands by name

Popular brands

Hyundai 2007 Sonata, Owner'S Manual

Search results

Summary of Contents for 2007 Sonata

Reviews:

Related manuals for 2007 Sonata

Brands by name

Popular brands