manualshive.com logo in svg

Hyundai 2007 Sonata, Owner'S Manual

The Hyundai 2007 Sonata Owner's Manual is a comprehensive guide that provides detailed instructions and information about the features, maintenance, and operation of the vehicle. This essential manual is available for free download on our website, ensuring easy access to this valuable resource anytime, anywhere.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

8

2) Make sure that the engine hood and trunk lid

are closed and latched.

3) Lock the doors using the transmitter of the

keyless entry system or key.

After completion of the steps above, the turn
signal lights will blink once and the system will
be armed.
The system can also be armed by locking the
doors with the key; however, the turn signal
lights are not operated.
If any door, trunk lid or engine hood is not opened
or the ignition key is not inserted in the ignition
switch  within 30 seconds, the system will be
rearmed.

NOTE:

1) If any door, trunk lid or engine hood

remains open, the system will not be
armed.

2) If this happens, rearm the system as

previously described.

NOTE:

Do not arm the system until all passengers
have left the car. If the system is armed while
a passenger(s) remains in the car, the alarm
may be activated when the remaining
passenger(s) leaves the car.

THEFT-ALARM SYSTEM

B070A01A-AAT

This system is designed to provide protection
from unauthorized entry into the car. This sys-
tem is operated in three stages : the first is the
"Armed" stage, the second is the "Alarm" stage
and the third is the "Disarmed" stage. If trig-
gered, the system provides an audible alarm
with blinking of the turn signal lights.

B070B02NF-AAT

Armed Stage

HMR

Park the car and stop the engine. Arm the
system as described below.

1) Remove the ignition key from the ignition

switch.

NOTE:

The transmitter will not work if any of fol-
lowing occur:
-

The ignition key is in ignition switch.

-

You exceed the operating distance limit
(10 m).

-

The battery in the transmitter is weak.

-

Other vehicles or objects may be block-
ing the signal.

-

The weather is extremely cold.

-

The transmitter is close to a radio trans-
mitter such as a radio station or an
airport which can interfere with normal
operation of the transmitter.

When the transmitter does not work cor-
rectly, open and close the door with the
ignition key. If you have a problem with the
transmitter, contact an authorized Hyundai
Dealer.

NOTE:

Keep the transmitter away from water or
any liquid. If the keyless entry system is
inoperative due to exposure to water or
liquids, it will not be covered by your manu-
facturer vehicle warranty.

Summary of Contents for 2007 Sonata




























































































































































































































































































Reviews:

No comments

Related manuals for 2007 Sonata

Lincoln 2015 MKS Owner'S Manual preview
2015 MKS
Brand: Lincoln Pages: 424
Volkswagen 1983 Camper Onwers Manual preview
1983 Camper
Brand: Volkswagen Pages: 26
FormFit HD 10L07 Installation Instructions preview
HD 10L07
Brand: FormFit Pages: 2
Brodit ProClip 804438 Installation Instructions preview
ProClip 804438
Brand: Brodit Pages: 2
Yescom YES5062 User Manual preview
YES5062
Brand: Yescom Pages: 4
Z Automotive Tazer DT User Manual preview
Tazer DT
Brand: Z Automotive Pages: 16
Chevrolet LUMINA 1997 Owner'S Manual preview
LUMINA 1997
Brand: Chevrolet Pages: 376
Mazda 2008 CX-9 Brochure & Specs preview
2008 CX-9
Brand: Mazda Pages: 15
Yakima Landing Pad 24 Quick Start Manual preview
Landing Pad 24
Brand: Yakima Pages: 11
P-Invent Troller User Manual preview
Troller
Brand: P-Invent Pages: 4
Xhorse VVDI User Manual preview
VVDI
Brand: Xhorse Pages: 48
Road Ranger H392 Installation Manual preview
H392
Brand: Road Ranger Pages: 22
Kia OPTIA hybrid 2020 Features & Functions Manual preview
OPTIA hybrid 2020
Brand: Kia Pages: 54
HAKR TRIP 3 Instructions For Use Manual preview
TRIP 3
Brand: HAKR Pages: 9
Yakima K974 Manual preview
K974
Brand: Yakima Pages: 11
Toyota 2011 Camry SE V6 Brochure & Specs preview
2011 Camry SE V6
Brand: Toyota Pages: 33
Volvo XC70 - ANNEXE 808 Quick Manual preview
XC70 - ANNEXE 808
Brand: Volvo Pages: 8
AllTrade Powerbuilt 648601 Operating Instructions preview
Powerbuilt 648601
Brand: AllTrade Pages: 3

Brands by name

Popular brands

Load more brands